Ideal low resistance expansion joint filler for brickwork and concrete blockwork
Brickfill fully meets the British Standards for movement joints in brickwork
All pre-cut rolls have a scored tear off strip. Simply build in Brickfill flush with the surface of the brickwork and then pull off the “tear off” strip, leaving a correctly sized recess, to allow the installation of a suitable high performance silicon sealant, without the need for a bond breaker
H+HÕs Celcon Blocks High Strength Grade (7.3N/mm2 Ð identified with a black stripe on the block) is ideal where higher compressive strengths are required such as in the foundations and lower storeys of three storey buildings, piers under high vertical loads and in multi-storey buildings.
This highly efficient block (thermal conductivity of just 0.11 W/mK) is sufficiently loadbearing for two storey buildings and can be used below DPC. Identified by the distinctive painted blue line, Celcon Solar Grade has a compressive strength of 2.9N/mm2 and is principally used where enhanced thermal performance is required.
Celcon Block Standard Grade is BBA certified and has a compressive strength of 3.6N/mm2. Its all-round performance allows a 100mm Standard Grade Celcon Block to be used consistently throughout a build, eliminating on-site confusion
This solid, dense concrete block from Aggregate Industries is suitable for cavity or solid wall constructions, internal load bearing walls and beam and block flooring. Water resistant with sound insulation properties.
H+HÕs Celcon Blocks High Strength Grade (7.3N/mm2 Ð identified with a black stripe on the block) is ideal where higher compressive strengths are required such as in the foundations and lower storeys of three storey buildings, piers under high vertical loads and in multi-storey buildings.
This highly efficient block (thermal conductivity of just 0.11 W/mK) is sufficiently loadbearing for two storey buildings and can be used below DPC. Identified by the distinctive painted blue line, Celcon Solar Grade has a compressive strength of 2.9N/mm2 and is principally used where enhanced thermal performance is required.
Celcon Block Standard Grade is BBA certified and has a compressive strength of 3.6N/mm2. Its all-round performance allows a 100mm Standard Grade Celcon Block to be used consistently throughout a build, eliminating on-site confusion
This solid, dense concrete block from Aggregate Industries is suitable for cavity or solid wall constructions, internal load bearing walls and beam and block flooring. Water resistant with sound insulation properties.