Worked really well on sleepers purchased for a raised bed.
5 months ago
Keith
Type of purchase: DIY
0
0
5
So yes would buy them again
What can you say, they are screws? Obviously bought for a specific use.
5 months ago
Mark
Type of purchase: DIY
Yes, I would recommend to a friend
0
0
4
I would definitely buy again
Quick and easy delivery, although it would be nice to be able to add and alter orders online rather than having to call the depo
4 years ago
chris
Type of purchase: DIY
Yes, I would recommend to a friend
0
0
5
Great product.
The pack says that no pre drilling is needed but I didn't even try putting them in without pre drilling. They were never going to go through 6" of hardwood without a 5mm pilot hole (and I greased them too).
It's the second time I've used then. The first was on softwood but I pre drilled that too.
They all went in using a 600w drill without any torque clutch.
Other than that they are great. Strong and excellent grip. And the supplied hex head driver is such a bonus.
5 years ago
Paul
Type of purchase: DIY
Yes, I would recommend to a friend
2
0
3
Well suited
Garden retaining wall
5 years ago
john
0
0
5
Great service from TP
Pack arrived in sealed package along with ordered timber. Delivery was on scheduled day. Very pleased with TP service
These screws consist of an threaded cylindrical shaft that tapers to a point, with a Hex head at the other end. When these are driven into timber, the threads bite into the wood, while the head stops the screw from going all the way through as it provides compression.
These screws consist of an threaded cylindrical shaft that tapers to a point, with a Hex head at the other end. When these are driven into timber, the threads bite into the wood, while the head stops the screw from going all the way through as it provides compression.
Pan head self tapping screws are mainly used in sheet metal but can be used in soft plastics or aluminium. These screws speed up assembly as there is no need to tap holes as with machine screws.
Deck-Tite unique thread pitch to Core Size Ratio gives the perfect balance between ease of insertion and pull-out retention whilst increasing the core sheer strength. Its Tri-Lock thread forms, not cuts, a thread in the material expanding the wood which then relaxes back around the screw ensuring a tight and locked fix. Once driven in the screw will not move, it is secure for good - no stubbed toes!
These screws consist of an threaded cylindrical shaft that tapers to a point, with a Hex head at the other end. When these are driven into timber, the threads bite into the wood, while the head stops the screw from going all the way through as it provides compression.
These screws consist of an threaded cylindrical shaft that tapers to a point, with a Hex head at the other end. When these are driven into timber, the threads bite into the wood, while the head stops the screw from going all the way through as it provides compression.
Pan head self tapping screws are mainly used in sheet metal but can be used in soft plastics or aluminium. These screws speed up assembly as there is no need to tap holes as with machine screws.
Deck-Tite unique thread pitch to Core Size Ratio gives the perfect balance between ease of insertion and pull-out retention whilst increasing the core sheer strength. Its Tri-Lock thread forms, not cuts, a thread in the material expanding the wood which then relaxes back around the screw ensuring a tight and locked fix. Once driven in the screw will not move, it is secure for good - no stubbed toes!