Sharp, hardened threads designed to cut their own mating thread as they are driven in.
Eliminates the need to tap a thread into the material beforehand. This saves significant time and effort when joining sheet metal, plastics, or wood
A 6-gauge diameter (approximately 3.5mm) with a short 1/2-inch (13mm) shaft length.
Perfect for light-duty fastening or attaching thin materials where a longer screw would protrude out the back and cause a safety hazard or cosmetic issue.
A slightly rounded top with a flat underside that sits flush against the material's surface.
Featuring a classic rounded Pan Head, the flat underside of the screw head distributes pressure evenly across the surface. This makes them particularly effective when securing thin gauge metals, plastic trims, or soft materials that might otherwise warp or tear under a countersunk screw.
These screws consist of an threaded cylindrical shaft that tapers to a point, with a Hex head at the other end. When these are driven into timber, the threads bite into the wood, while the head stops the screw from going all the way through as it provides compression.
A drywall screw is designed for attaching drywall to wood or metal studs. It is available with either coarse or fine threads. They are threaded along their entire length and are self-threading, this allows them to be installed without the need of apilot hole.
Featuring a classic rounded Pan Head, the flat underside of the screw head distributes pressure evenly across the surface. This makes them particularly effective when securing thin gauge metals, plastic trims, or soft materials that might otherwise warp or tear under a countersunk screw.
These screws consist of an threaded cylindrical shaft that tapers to a point, with a Hex head at the other end. When these are driven into timber, the threads bite into the wood, while the head stops the screw from going all the way through as it provides compression.
A drywall screw is designed for attaching drywall to wood or metal studs. It is available with either coarse or fine threads. They are threaded along their entire length and are self-threading, this allows them to be installed without the need of apilot hole.