The Grant Vortex Eco Utility System boilers incorporate the latest version of the Grant Vortex stainless steel heat exchanger and as you would expect from a product with this pedigree, they are exceptionally quiet in operation and feature the latest Riello burner technology.
The latest Grant Vortex Pro internal combination oil boiler features a 24 litre expansion vessel, neon diagnostic indicators and a factory-fitted condensate trap - all designed to make installation and servicing easier. With larger than normal plate heat exchangers, the hot water performance of this high-efficiency combi boiler is vastly increased. The two very accurate electronic temperature controls allow the boiler to operate in condensing mode on central heating and instant hot water production can be maintained. In addition, a low system pressure cut off switch protects the combi boiler in the event of system water loss.
The Grant Vortex Pro outdoor combination oil boiler features internal frost protection, a 24 litre expansion vessel, neon diagnostic indicators and a factory-fitted condensate trap, together with the conveniently factory-fitted, multi-directional flue - and all of this has been designed to make installation and servicing easier. With larger than normal heat exchangers, the hot water performance of this high-efficiency combi boiler is vastly increased. The two very accurate electronic temperature controls allow the boiler to operate in condensing mode on central heating and instant hot water production can be maintained.
Speedfit push-fit fitting for the connection of plastic and copper pipe. The Stem Elbow allows a 90 degree male to female connection making it the perfect coupler for appliances such as cold water storage tanks. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods. Note: will all plastic pipes the relevant manufacturer’s pipes insert is required. Designed, manufactured and assembled in the UK by John Guest Speedfit.
Speedfit push-fit fitting for the connection of plastic and copper pipe. The Stem Elbow allows a 90 degree male to female connection making it the perfect coupler for appliances such as cold water storage tanks. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods. Note: will all plastic pipes the relevant manufacturer’s pipes insert is required. Designed, manufactured and assembled in the UK by John Guest Speedfit.
The Grant Vortex Eco Utility System boilers incorporate the latest version of the Grant Vortex stainless steel heat exchanger and as you would expect from a product with this pedigree, they are exceptionally quiet in operation and feature the latest Riello burner technology.
The latest Grant Vortex Pro internal combination oil boiler features a 24 litre expansion vessel, neon diagnostic indicators and a factory-fitted condensate trap - all designed to make installation and servicing easier. With larger than normal plate heat exchangers, the hot water performance of this high-efficiency combi boiler is vastly increased. The two very accurate electronic temperature controls allow the boiler to operate in condensing mode on central heating and instant hot water production can be maintained. In addition, a low system pressure cut off switch protects the combi boiler in the event of system water loss.
The Grant Vortex Pro outdoor combination oil boiler features internal frost protection, a 24 litre expansion vessel, neon diagnostic indicators and a factory-fitted condensate trap, together with the conveniently factory-fitted, multi-directional flue - and all of this has been designed to make installation and servicing easier. With larger than normal heat exchangers, the hot water performance of this high-efficiency combi boiler is vastly increased. The two very accurate electronic temperature controls allow the boiler to operate in condensing mode on central heating and instant hot water production can be maintained.
Speedfit push-fit fitting for the connection of plastic and copper pipe. The Stem Elbow allows a 90 degree male to female connection making it the perfect coupler for appliances such as cold water storage tanks. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods. Note: will all plastic pipes the relevant manufacturer’s pipes insert is required. Designed, manufactured and assembled in the UK by John Guest Speedfit.
Speedfit push-fit fitting for the connection of plastic and copper pipe. The Stem Elbow allows a 90 degree male to female connection making it the perfect coupler for appliances such as cold water storage tanks. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods. Note: will all plastic pipes the relevant manufacturer’s pipes insert is required. Designed, manufactured and assembled in the UK by John Guest Speedfit.