The Neutron is the industry’s smallest flexible strip measuring at only 3.5mm in width, which makes it a great choice for kitchen designs where inconspicuous lighting is essential. Do not be fooled into thinking that the small size compromises the light output though, as this strip packs just as much of a punch as any. Highly compacted diodes greatly reduce the appearance of dots whilst providing a powerful light output and cut marks every 25mm enable the strip to be cut closer to the desired length, therefore reducing potential dark spots at each end. The strip is also kitted out with a driver connection cable soldered at either side of the strip runs at 24V which ensures a cool operating temperature and also prevents volt drop.
The Sigma 2 is an innovative solution designed purposely to solve the problem of LED flexible strips not being able to bend around corners. This is achieved with a unique zig-zag style shaped PCB board which allows the strip to be folded up to 90° without damaging any diodes. The strip also features twice the number of diodes as the original Sigma, with updated features such as 3M VHB (very high bond) adhesive tape and cut marks every 50mm. Any cut off sections can be re-used multiple times with the wide range of accessories.
Designed specifically for plinth boards, the Accent profile is an innovative new solution for mounting flexible strip lighting without the fear of drooping over time. The flexible strip mounting platform has been cleverly angled to ensure the diffusion of individual LED points, as well being removable for ease of installation and serviceability. It is designed to fit 16-18mm plinth boards increasing flexibility and be cut to size.
The Link-S Kinetic switch is an innovative solution that uses kinetic energy, created by the action of pushing the switch, to transmit a wireless signal to turn your lighting on/off. This means that the switch can be installed in any location without the need for chasing wires out of walls or re-plastering/decorating surfaces.
The Neutron is the industry’s smallest flexible strip measuring at only 3.5mm in width, which makes it a great choice for kitchen designs where inconspicuous lighting is essential. Do not be fooled into thinking that the small size compromises the light output though, as this strip packs just as much of a punch as any. Highly compacted diodes greatly reduce the appearance of dots whilst providing a powerful light output and cut marks every 25mm enable the strip to be cut closer to the desired length, therefore reducing potential dark spots at each end. The strip is also kitted out with a driver connection cable soldered at either side of the strip runs at 24V which ensures a cool operating temperature and also prevents volt drop.
The Sigma 2 is an innovative solution designed purposely to solve the problem of LED flexible strips not being able to bend around corners. This is achieved with a unique zig-zag style shaped PCB board which allows the strip to be folded up to 90° without damaging any diodes. The strip also features twice the number of diodes as the original Sigma, with updated features such as 3M VHB (very high bond) adhesive tape and cut marks every 50mm. Any cut off sections can be re-used multiple times with the wide range of accessories.
Designed specifically for plinth boards, the Accent profile is an innovative new solution for mounting flexible strip lighting without the fear of drooping over time. The flexible strip mounting platform has been cleverly angled to ensure the diffusion of individual LED points, as well being removable for ease of installation and serviceability. It is designed to fit 16-18mm plinth boards increasing flexibility and be cut to size.
The Link-S Kinetic switch is an innovative solution that uses kinetic energy, created by the action of pushing the switch, to transmit a wireless signal to turn your lighting on/off. This means that the switch can be installed in any location without the need for chasing wires out of walls or re-plastering/decorating surfaces.