Free Click & Collect
Within One Hour
Delivery address
Collection branch
Ideas & Advice
VAT
EX
INC
Head Splayed DH10 Bath 630 x 100 x 140
Hover Over to Zoom In
Overview
- Suitable for brick courses
- Perfect for use as decoration
- Non-structural product
Technical specification
Height
140 mm
Length
630 mm
Width
100 mm
Brand Name
Forticrete
Reviews
Be the first to review this product.
Sovereign 30806097 CDM Plugs 10mm x 55mm Pack 100
Sovereign Membrane Plugs are manufactured from glass filled polyamide, giving a high strength and corrosion resistant fixing. They are intended for use in damp proofing and waterproofing applications, to secure SovDrain membranes to the substrate, as part of the SovDrain waterproofing system. The plugs must be sealed using SovDrain Sealing Rope to the underside of the plug head in all below ground applications. Sovereign CDM8 plugs can be used in above ground situations, which includes a rubber sealing washer already installed onto the plug.
£72.00 each (Inc. VAT)
Sovereign 30806104 Sovdrain CDM Rapid Seal Plugs & Washers Pack 10mm x 55mm
Sovereign CDM8 Rapid Seal Plugs and Washers are manufactured from polypropylene giving a corrosion resistant fixing. The two-piece plug comprises of an expansion pin and fixing body for fixing through insulation into a solid substrate and into COB wall construction, as part of the SovDrain waterproofing system.
£73.80 each (Inc. VAT)
Sovereign 30616227 CDM20 Membrane Roll 2M x 10M
Sovereign SovDrain CDM 20 is a high performance cavity drainage system membrane. It provides a robust drainage membrane suitable for use on floors, as part of the SovDrain Waterproofing system. SovDrain CDM 20 is easily cut to shape/size using a knife or scissors. This membrane is typically finished with either a Sovereign SBR Bonding Agent modified screed (minimum 65mm) or a floating floor.
£200.10 each (Inc. VAT)
Sovereign 30806090 CDM8 Membrane Roll 2.4M x 20M
Sovereign CDM8 membrane provides a robust drainage membrane suitable for above and below ground applications to walls and floors as part of the SovDrain waterproofing system. With a fast track application, the membrane protects new finishes from the effects of dampness and/or salt contamination in above ground situations, and prevents water ingress below ground in areas such as cellars, basements, vaults, and tunnels. This membrane has a relatively low stud profile (8mm), thus minimising wall and floor level changes. The CDM8 membrane is typically finished with either a pre-treated timber stud partition wall and plasterboard or independent stud metal frame system. The floors can be finished with a Sovereign SBR modified screed (minimum 65mm) or a floating floor.
£342.00 each (Inc. VAT)