Knauf Insulation Loft Roll 44 Short Length Combi Cut
9000200436
Watch video
Hover Over to Zoom In
Overview
Combi-cut products are supplied partially perforated, providing the flexibility to be used between joists or used uncut as a full-width roll, maximising on-site efficiency.
Manufactured in long lengths to allow quick and simple installation maximising on-site efficiency.
Compression packed and lightweight for easy handling and moving around a site.
Technical specification
Length
4300 mm
Width
1140 mm
Material
Glass Mineral Wool
Usage
Thermal Loft insulation for a pitched roof at ceiling level only. Standard loft insulation which runs between timber joists and then cross layered on top.
Coverage
4.9 m2
Fire Retardant
Y
Thermal Conductivity
0.044 W/mK
Pack Quantity
1
Certifications Met
Euroclass A1 Reaction to Fire Classification, Eurofins Gold
This highly efficient block (thermal conductivity of just 0.11 W/mK) is sufficiently loadbearing for two storey buildings and can be used below DPC. Identified by the distinctive painted blue line, Celcon Solar Grade has a compressive strength of 2.9N/mm2 and is principally used where enhanced thermal performance is required.
IKO Hyload Original Damp-proof Course system is a flexible polymeric sheet material, used within masonry walls to prevent passage of moisture from the ground and at all levels as cavity tray to prevent the downward movement of water.Trusted for over 40 years, Hyload Original is the UK’s leading High Performance DPC
Celotex GA4000 is an easy to install polyisocyanurate
(PIR) insulation board with excellent thermal performance,
featuring a low emissivity foil facing. Available in thicknesses
from 50mm to 100mm, it can be considered for roof, wall
and floor applications.
Length
2400 mm
Thickness
80 mm
Width
1200 mm
Material
PIR
Coverage
2.88 m2
Fire Retardant
N
Acoustic
N
Thermal Conductivity
0.022 W/mK
Certifications Met
BBA Certificate Number 16/5352
BBA Certificate Number 17/5405
Flat roof insulation Insulation for use with hot applied roofing systems or adhered single ply systems. Fibre free rigid polyisocyanurate (PIR) insulation core faced with coated glass tissue on one side and bitumenised glass tissue with polypropylene fleece on the other.
This highly efficient block (thermal conductivity of just 0.11 W/mK) is sufficiently loadbearing for two storey buildings and can be used below DPC. Identified by the distinctive painted blue line, Celcon Solar Grade has a compressive strength of 2.9N/mm2 and is principally used where enhanced thermal performance is required.
IKO Hyload Original Damp-proof Course system is a flexible polymeric sheet material, used within masonry walls to prevent passage of moisture from the ground and at all levels as cavity tray to prevent the downward movement of water.Trusted for over 40 years, Hyload Original is the UK’s leading High Performance DPC
Celotex GA4000 is an easy to install polyisocyanurate
(PIR) insulation board with excellent thermal performance,
featuring a low emissivity foil facing. Available in thicknesses
from 50mm to 100mm, it can be considered for roof, wall
and floor applications.
Flat roof insulation Insulation for use with hot applied roofing systems or adhered single ply systems. Fibre free rigid polyisocyanurate (PIR) insulation core faced with coated glass tissue on one side and bitumenised glass tissue with polypropylene fleece on the other.