Free Click & Collect
Within One Hour
Delivery address
Collection branch
Ideas & Advice
VAT
EX
INC
Compression Stop End 15mm - Bag of 10
5
1 Review
Hover Over to Zoom In
Frequently bought together
Overview
- Fast and simple installation
- Heat free, no soldering needed
- Joint can be dismantled and re-built
- Joints can be made on wet pipework
- Standard 1 Year Manufacturing Guarantee
- Manufactured to EN1254 Specification
- WRAS approved
- Pressure tested to 16 bar
- UK manufacture
Technical specification
Suitable for
Water
Diameter
15 mm
Connection Type
Compression
Material
Brass
Years Guaranteed
1
Type
Compression Stop End
Pack Quantity
10
Brand Name
Travis Perkins
Manufacturer Model No
P9234
Made To Order
N
Reviews
5
1 Review
Sort reviews:
Sort reviews by:
Reviewed by 1 customers
5
I can't believe I was asked to review this!
It did up and didn't leak, a marvel!
6 years ago
David
Type of purchase: DIY
Yes, I would recommend to a friend
1
0
BULK BUY
Create your own flow system by using the endfeed range to build a strong and leak free system.
£0.78 each (Inc. VAT)
End Feed Backplate Elbow 15mm x 1/2in Bag of 10
Create your own flow system by using the endfeed range to build a strong and leak free system.
£72.00 per bag (Inc. VAT)
Multifit Pdk + 1m Length + Clips 60/100 (Black) 720622901
Baxi Plume Diversion Kit 1000mm Black consisting of 1000mm pipe, 2 support clips, flue elbow and exit elbow.
£101.12 each (Inc. VAT)
JG Speedfit 90° Equal Elbow Elbow 15mm
Speedfit push-fit plastic fitting for the connection of plastic and copper pipe. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods. Note: with all plastic pipes the relevant manufacturer’s pipe insert is required. Designed, manufactured and assembled in the UK by John Guest Speedfit.
£2.40 each (Inc. VAT)