Eco-Friendly Construction: Produced from a strictly controlled blend of recycled polythene, supporting sustainable building practices without compromising on durability.
Dual Protection: Effectively blocks the entry of Radon gas while simultaneously acting as a moisture-resistant damp proof membrane.
Versatile Application: Suitable for use in most common flooring constructions, including over-site concrete and below floor screeds.
Compliance Guaranteed: Designed for use in accordance with BRE Report BR 211, ensuring your project meets the highest UK safety standards for radon protection.
Drybase Plaster Mesh Membrane LP is produced using high-quality Polypropylene material and provides a barrier to moisture, salts and vapour. It is a slimline membrane with 2.5mm studs on the rear that enables the management of moisture without significantly reducing room space. A plastic mesh is welded to the front surface of the membrane, allowing it to accept plaster coats via standard trowel application or as a base for dot and dab plasterboard application.
Sovereign Corner Strip is a synthetic butyl/rubber based extruded strip sealant laminated with a PVC liner. It is primarily used for creating a seal over joints between SovDrain membranes, as part of the SovDrain waterproofing system.
Size
150mm x 20m
Length
20m
Thickness
1mm
Width
150mm
Material
Synthetic Butyl/Rubber-based Extruded Strip Sealant with PVC Liner
Fleece backed 100 mm waterproof butyl tape gives a well-bonded seal to the mesh face of Drybase. Plaster Membrane. The fleece backing to this tape also accepts a plaster coat finish as well as plaster adhesive where a dot and dab plasterboard system is preferred.
The expansion joint roll from Fillcrete Brickfill consists of cross linked polyethylene foams suitable for brick and blockwork expansion and movement joints. It is handy and lightweight. 10 rolls per pack.
Drybase Plaster Mesh Membrane LP is produced using high-quality Polypropylene material and provides a barrier to moisture, salts and vapour. It is a slimline membrane with 2.5mm studs on the rear that enables the management of moisture without significantly reducing room space. A plastic mesh is welded to the front surface of the membrane, allowing it to accept plaster coats via standard trowel application or as a base for dot and dab plasterboard application.
Sovereign Corner Strip is a synthetic butyl/rubber based extruded strip sealant laminated with a PVC liner. It is primarily used for creating a seal over joints between SovDrain membranes, as part of the SovDrain waterproofing system.
Fleece backed 100 mm waterproof butyl tape gives a well-bonded seal to the mesh face of Drybase. Plaster Membrane. The fleece backing to this tape also accepts a plaster coat finish as well as plaster adhesive where a dot and dab plasterboard system is preferred.
The expansion joint roll from Fillcrete Brickfill consists of cross linked polyethylene foams suitable for brick and blockwork expansion and movement joints. It is handy and lightweight. 10 rolls per pack.