A watertight low-profile sheet membrane for protection against dampness in walls without the need to drill and install plugs. The membrane is a 1.5 mm thick flexible polypropylene sheet with a fleeced surface on both sides. The two fleeces ensure good adhesion to the wall by means of Drybase Flex Adhesive, as well as the direct application of plaster to the face.
Size
1.2 × 15 m
Length
15 m
Thickness
1.5 mm
Width
1.2 m
Weight
9.6
Material
Fleece
Colour
Black
Coverage
1 × 15 m
Pack Quantity
1
Certifications Met
ISO 9001, ISO 14001, Fire Rating: Class F (EN 13501)
Sovereign Membrane Plugs are manufactured from glass filled polyamide, giving a high strength and corrosion resistant fixing. They are intended for use in damp proofing and waterproofing applications, to secure SovDrain membranes to the substrate, as part of the SovDrain waterproofing system. The plugs must be sealed using SovDrain Sealing Rope to the underside of the plug head in all below ground applications. Sovereign CDM8 plugs can be used in above ground situations, which includes a rubber sealing washer already installed onto the plug.
Sovereign CDM8 Membrane Lath Plugs are manufactured from polypropylene, giving a corrosion resistant fixing. They are intended for use in damp proofing and waterproofing applications, to secure SovDrain lath membranes to the substrate, as part of the SovDrain waterproofing system.
Drybase Liquid-Applied DPM is a single-pack barrier coating for above ground use. It is supplied ready to use. It is available in black or white with a consistency similar to that of thick emulsion paint. The product is applied in two coats. Drybase Liquid-Applied DPM Is suitable for use on solid floors, embedded timbers and walls. Once applied, the product cures to form a membrane that is flexible and elastic. Drybase Liquid-Applied DPM is water- based and can be applied to damp substrates by brush, roller, or spray. The applied product is typically touch-dry in one hour.
Size
1 Litre
Interior or Exterior Use
Interior
Coverage per Litre
4.5 m2 per 5 litres for vapour barrier, 7 – 9 m2 per 5 litres for general DPM
A watertight low-profile sheet membrane for protection against dampness in walls without the need to drill and install plugs. The membrane is a 1.5 mm thick flexible polypropylene sheet with a fleeced surface on both sides. The two fleeces ensure good adhesion to the wall by means of Drybase Flex Adhesive, as well as the direct application of plaster to the face.
Sovereign Membrane Plugs are manufactured from glass filled polyamide, giving a high strength and corrosion resistant fixing. They are intended for use in damp proofing and waterproofing applications, to secure SovDrain membranes to the substrate, as part of the SovDrain waterproofing system. The plugs must be sealed using SovDrain Sealing Rope to the underside of the plug head in all below ground applications. Sovereign CDM8 plugs can be used in above ground situations, which includes a rubber sealing washer already installed onto the plug.
Sovereign CDM8 Membrane Lath Plugs are manufactured from polypropylene, giving a corrosion resistant fixing. They are intended for use in damp proofing and waterproofing applications, to secure SovDrain lath membranes to the substrate, as part of the SovDrain waterproofing system.
Drybase Liquid-Applied DPM is a single-pack barrier coating for above ground use. It is supplied ready to use. It is available in black or white with a consistency similar to that of thick emulsion paint. The product is applied in two coats. Drybase Liquid-Applied DPM Is suitable for use on solid floors, embedded timbers and walls. Once applied, the product cures to form a membrane that is flexible and elastic. Drybase Liquid-Applied DPM is water- based and can be applied to damp substrates by brush, roller, or spray. The applied product is typically touch-dry in one hour.