High-quality deckboard that is made from slow-grown Pine enabling you to build attractive decking that can extend your home into your garden, or give you a tranquil hideaway. Pressure treated for longer life and to help resist rot. It is hardwearing and very stable
Cuprinol UV Guard Decking Oil can be used to penetrate into wood to replace natural oils and resins lost through weathering. Its tinted formula revitalises the colour of weathered wood.
Wavy metal decking or garden fence infill panel, fix between upper and lower timber frames (not included). Ideal for around decking. Each panel: 770mm x 280mm; pack of 2 (560mm run). Solid galvanised steel, powder-coated greyish silver. Features 16mm x 6mm flat top and base rails with pre-drilled screw holes (screws not included). Infill bars: 10mm diameter.
Ronseal One Coat Fence Life gives colour and protection to rough sawn sheds and fences for up to two years, in just one coat.
Make sure it's a warm, dry day, above 10°C and the wood is clean and dry. Cold, wet weather stops the stain from drying. Use a stiff brush to get rid of any dirt.
You can either brush or spray your stain. When brushing, get lots of stain on your brush and apply a thick coat to your wood but don’t spread it too far. After one hours, it will be 100% showerproof. It takes 4 hours to dry fully. If your wood is weathered, you may need to apply a second coat. After the first coat has dried, review it to see if you need a second one. When spraying, pour the liquid into the tank. Pump it up or turn it on and start spraying. Use long, sweeping, horizontal arm movements for an even finish. Move along the full width of the fence panel, drop down and repeat the process. Overlap each pass by 50% for even coverage.
High-quality deckboard that is made from slow-grown Pine enabling you to build attractive decking that can extend your home into your garden, or give you a tranquil hideaway. Pressure treated for longer life and to help resist rot. It is hardwearing and very stable
Cuprinol UV Guard Decking Oil can be used to penetrate into wood to replace natural oils and resins lost through weathering. Its tinted formula revitalises the colour of weathered wood.
Wavy metal decking or garden fence infill panel, fix between upper and lower timber frames (not included). Ideal for around decking. Each panel: 770mm x 280mm; pack of 2 (560mm run). Solid galvanised steel, powder-coated greyish silver. Features 16mm x 6mm flat top and base rails with pre-drilled screw holes (screws not included). Infill bars: 10mm diameter.
Ronseal One Coat Fence Life gives colour and protection to rough sawn sheds and fences for up to two years, in just one coat.
Make sure it's a warm, dry day, above 10°C and the wood is clean and dry. Cold, wet weather stops the stain from drying. Use a stiff brush to get rid of any dirt.
You can either brush or spray your stain. When brushing, get lots of stain on your brush and apply a thick coat to your wood but don’t spread it too far. After one hours, it will be 100% showerproof. It takes 4 hours to dry fully. If your wood is weathered, you may need to apply a second coat. After the first coat has dried, review it to see if you need a second one. When spraying, pour the liquid into the tank. Pump it up or turn it on and start spraying. Use long, sweeping, horizontal arm movements for an even finish. Move along the full width of the fence panel, drop down and repeat the process. Overlap each pass by 50% for even coverage.