A drywall screw is designed for attaching drywall to wood or metal studs. It is available with either coarse or fine threads. They are threaded along their entire length and are self-threading, this allows them to be installed without the need of apilot hole.
Self-tapping collated drywall screws are the quick and secure way of fixing plasterboard linings to lower gauge metal or timber frames using an automatic screw gun.
Plasterboard linings must be fixed securely to achieve optimum fire and acoustic performance. 25mm British Gypsum Collated Drywall Screws allow safe and easy fixing of single layer 12.5mm and 15mm boards to 0.8mm maximum gauge metal framing.
Supplied in strips for faster fixing, these corrosion resistant screws give you a quick and simple way to maintain system integrity.
These screws consist of an threaded cylindrical shaft that tapers to a point, with a Hex head at the other end. When these are driven into timber, the threads bite into the wood, while the head stops the screw from going all the way through as it provides compression.
The 25mm Fibre Cement board screws are perfect fixing method for the 6mm NoMorePly tile backer boards. They have a unique self tapping tip and self-countersinking head. This means they are fast to install and sit completely flush with the surface of the board. The high quality zinc plating means they are suitable for use in wet areas such as bathrooms, wet room and kitchens.
A drywall screw is designed for attaching drywall to wood or metal studs. It is available with either coarse or fine threads. They are threaded along their entire length and are self-threading, this allows them to be installed without the need of apilot hole.
Self-tapping collated drywall screws are the quick and secure way of fixing plasterboard linings to lower gauge metal or timber frames using an automatic screw gun.
Plasterboard linings must be fixed securely to achieve optimum fire and acoustic performance. 25mm British Gypsum Collated Drywall Screws allow safe and easy fixing of single layer 12.5mm and 15mm boards to 0.8mm maximum gauge metal framing.
Supplied in strips for faster fixing, these corrosion resistant screws give you a quick and simple way to maintain system integrity.
These screws consist of an threaded cylindrical shaft that tapers to a point, with a Hex head at the other end. When these are driven into timber, the threads bite into the wood, while the head stops the screw from going all the way through as it provides compression.
The 25mm Fibre Cement board screws are perfect fixing method for the 6mm NoMorePly tile backer boards. They have a unique self tapping tip and self-countersinking head. This means they are fast to install and sit completely flush with the surface of the board. The high quality zinc plating means they are suitable for use in wet areas such as bathrooms, wet room and kitchens.