Hover Over to Zoom In
Overview
- Requires solder and blowtorch
- For use on hot and cold water systems
- Manufactured to BSEN1254: Part 1
- WRAS approved
- Actual size: 15mm x 1/2in
Technical specification
Suitable for
Gas & Water
Diameter
15 mm
Connection Type
End Feed
Material
Brass-Copper
Years Guaranteed
3
Type
End Feed Tap Connector
Brand Name
Wickes
Made To Order
N
Reviews
Be the first to review this product.
Hep2O straight tap connector with brass nut white 0.75x15mm
Hep2O is packed with unique features that make fitting easier quicker and more secure for installers. It is the only system with joint recognition and secure demounting and comes with a 50 year guarantee.
£5.71 each (Inc. VAT)
Hep2O Hand-TitanTM tap connector white 0.5x15mm
Hep2O is packed with unique features that make fitting easier quicker and more secure for installers. It is the only system with joint recognition and secure demounting and comes with a 50 year guarantee.
£4.38 each (Inc. VAT)
JG Speedfit female tap connector 15mm x 1/2inch
Speedfit push-fit fitting for the connection of plastic and copper pipe to a male thread appliance. The female coupler is ideal for the connection of taps and toilets. In comparison to other installation methods available no tools are required with this hand-tightened connection. Simply push the fitting fully onto the pipe and hand turn onto the thread. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods. Note: with all plastic pipes the relevant manufacturer’s pipe insert is required. Designed, manufactured and assembled in the UK by John Guest Speedfit.
£2.38 each (Inc. VAT)
JG Speedfit tap connector 22mm x 3/4inch Pack 5
Speedfit push-fit fitting for the connection of plastic and copper pipe to a male thread. The tap connector is ideal for the connection of taps and toilets. Simply push the fitting fully onto the pipe and turn onto the thread. Should the need arise to demount the connection unlock the nut push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures and easier working environment in confined paces and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods. Note: with all plastic pipes the relevant manufacturer’s pipe insert is required. Designed, manufactured and assembled in the UK by John Guest Speedfit.
£29.34 per bag (Inc. VAT)