Used to floor a section of loft in preparation for solar batteries. Good quality materials
6 months ago
Colin from Milford on Sea
Type of purchase: DIY
Yes, I would recommend to a friend
0
0
5
Great product for the application
It was advised that this boarding be used on an outdoor office I am currently constructing. It is of good quality and feels strong. The coating is moisture relevant so great for this application.
1 year ago
Christopher
Type of purchase: DIY
Yes, I would recommend to a friend
0
0
5
Floored
Very impressed with these boards they have renewed my floor perfectly. Great delivery service from Travis Perkins
3 years ago
customer
Type of purchase: DIY
Yes, I would recommend to a friend
1
0
5
Great product - prefer it over the usual chipboard
Super product: the grey matt finish gives a clean appearance. The boards were delivered on a pallet and wrapped in poly - even though they are highly rain resistant. (Top marks to the Wigton depot). Every board perfect. Price excellent as well. I used the Egger adhesive and they all went down flush and straight. Not a single defect.
5 years ago
Donald
Type of purchase: DIY
Yes, I would recommend to a friend
2
0
3
Some finished height issues!
Some of these boards were differing heights of upto 2 or 3mm and although of less interest quite different in colour. Some customers would like a uniform finished room, boards pushed firmly home together should be completely flush and level in this day and age!
6 years ago
NJ from Truro
Type of purchase: Trade
No, I would not recommend to a friend
5
2
3
Would use again, but would also consider other options!
Some variation in both grey finish colour and more annoyingly a difference of upto 2-3mm in finished board heights, this might cause issues for those fittings carpet tiles or pvc tiles etc, should be perfect every time with such an engineering product!
6 years ago
Nick
Type of purchase: DIY
No, I would not recommend to a friend
2
0
5
You only need 1 screw per joist for fixing
First of all I am not a trader, I am just doing a renovation project for my first floor floorboards in my house. The installation document suggests to just use one nail or screw per joist in the first row when laying down the sheet and the rest job is done by the magical D4 glue. I am not quite convinced by that in the first place. I just tried to lay this method in a small room and the result was over my expectation. My joists are about 8 mm uneven across 2 metre spans, which is tolerable. The D4 glue formed up the uneven gap under the sheet. It looked strong holding. Less screw or nails means no more squeaking. Trust me this product is definitely worth a few more pounds, you will get a lot back in long run.
6 years ago
atinject from South East London
Yes, I would recommend to a friend
2
0
5
TP provided an excellent service for an excellent product
An truyly excellent product. Easy to lay. Arrived much sooner ta
than first advised by the online computer system. Shrink wrapped and palletised.
7 years ago
David
0
0
5
TP - good service!
Good product, delivered on time by friendly very helpful driver.
This outstanding tongue-and-groove product is specified by the NHBC for new-build applications and is ideal in dry conditions for domestic flooring. EGGER P5 is also suitable for use in damp or humid environments, such as bathrooms and kitchens, where it provides excellent protection.
Depth
18 mm
Length
2400 mm
Thickness
18 mm
Width
600 mm
Weight
18.25 kg
Material
Chipboard
Moisture Resistant
Yes
Interior or Exterior Use
Interior
Structural
Yes
Edge Detail
Tongue and Grooved 4 Sides
Application
Building - Decorative Fixtures & Fittings - Furniture
This outstanding tongue-and-groove product is specified by the NHBC for new-build applications and is ideal in dry conditions for domestic flooring. EGGER P5 is also suitable for use in damp or humid environments, such as bathrooms and kitchens, where it provides excellent protection.