Paint is great, tp could not deliver the goods in time, i had ordered gloss and undercoat I cancelled both....the undercoat turned up with no invoice ....
Ronseal Trade Polyurethane Varnish is a traditional solvent based varnish that provides tough protection against knocks, scuffs and scratches.
Ensure the room is warm and well-ventilated. Sand the wood in the direction of the grain using 120 grit paper. Wear a suitable mask to avoid the inhalation of dust. Wipe away dust with white spirit and allow to dry. Always use a good quality, soft bristle brush. Stir the varnish thoroughly. Apply 3 coats leaving 6 hours between coats. Lightly sand with 240 grit paper and remove dust prior to application of the final coat.
Size
0.75 L
Suitable for
Suitable for providing tough protection against knocks, scuffs and scratches.
Sovereign FungiChek AntiCon is a biocidal paint that also reduces surface condensation. It can be used on internal walls, ceilings, pipework and metals to provide protection from fungi and mould growth. FungiChek AntiCon is ideal for kitchens, bathrooms, walls and ceilings and anywhere condensation and mould are a problem.
Contains a special fungicide which inhibits the growth of fungi and mould inside buildings. Its broad spectrum of antifungal activity makes it ideal for most interior walls and ceilings likely be disfigured by mould. Tested to BS 3900 Part G6.
Colour Family
Whites
Colour
White
Finish
Eggshell
Size
5 L
Application Method
Brush or Roller
Coverage per Litre
Up to 16 m²
Drying Time
Dependent on temperature/humidity
Drying time between coats
4 - 6 hrs
Clean equipment with
After use, remove as much paint as possible from equipment before cleaning with water
Suitable for
Interior Wall & Ceiling surfaces disfigured by mould
MAXAM PURA+ Anti-Mould/Condensation Thermal Coating (2.5 ltr, white): a specialised thermal paint formulated to mask staining and provide an insulating barrier, thereby preventing moisture ingress and condensation to inhibit mould growth.
Ronseal Trade Polyurethane Varnish is a traditional solvent based varnish that provides tough protection against knocks, scuffs and scratches.
Ensure the room is warm and well-ventilated. Sand the wood in the direction of the grain using 120 grit paper. Wear a suitable mask to avoid the inhalation of dust. Wipe away dust with white spirit and allow to dry. Always use a good quality, soft bristle brush. Stir the varnish thoroughly. Apply 3 coats leaving 6 hours between coats. Lightly sand with 240 grit paper and remove dust prior to application of the final coat.
Sovereign FungiChek AntiCon is a biocidal paint that also reduces surface condensation. It can be used on internal walls, ceilings, pipework and metals to provide protection from fungi and mould growth. FungiChek AntiCon is ideal for kitchens, bathrooms, walls and ceilings and anywhere condensation and mould are a problem.
Contains a special fungicide which inhibits the growth of fungi and mould inside buildings. Its broad spectrum of antifungal activity makes it ideal for most interior walls and ceilings likely be disfigured by mould. Tested to BS 3900 Part G6.
MAXAM PURA+ Anti-Mould/Condensation Thermal Coating (2.5 ltr, white): a specialised thermal paint formulated to mask staining and provide an insulating barrier, thereby preventing moisture ingress and condensation to inhibit mould growth.