The T 101 AO delivers clean curved cuts in wood. Its precision-ground teeth with a taper-ground body and narrow blade width enable curved cuts with spotless results. The blade�s high carbon steel material is appropriate for softwood and non-abrasive woodworking materials. It is equipped with a very fine tooth pitch (1.4 mm) for cutting very thin woodworking materials with 1.5-15 mm thickness.
For exact flush cuts and plunge cuts in wood, metal and plastics, eg cutting off stuck soft metal nails, making adjustment cuts in particle board and cutting plastic pipes to length
Suitable for
Wood with nails; Metal sandwich; Plastic coated boards; Plastics
Length
50 mm
Width
32 mm
Bore Size
Starlock
Working Length
50mm
Cut
Wood with nails; Metal sandwich; Plastic coated boards; Plastics
Shank Type
Starlock
Material
Coated Bi Metal
Application
Wood with nails; Metal sandwich; Plastic coated boards; Plastics
Thinner, harder saw blade for a faster and cleaner cut. With laser cut expansion slots to prevent blade warp and precision tensioning for superior blade flatness. Super micrograin carbide tips with titanium for maximum sharpness, strength and durability. Perma Shield coating to reduce heat, corrosion and resin build-up. Reduces kickback from feeding the saw too quickly. Designed with an average number of teeth ideal for cutting solid wood along the grain to a good finish.
The T 144 D delivers fast straight cuts in wood. Its sharp-ground, side-set teeth enable quick results. The high carbon steel blade material is appropriate for softwood and non-abrasive woodworking materials. Additionally, its large progressive tooth pitch (4-5.2 mm) enables the blade to cut a variety of wooden materials with 5-50 mm thickness.
The T 101 AO delivers clean curved cuts in wood. Its precision-ground teeth with a taper-ground body and narrow blade width enable curved cuts with spotless results. The blade�s high carbon steel material is appropriate for softwood and non-abrasive woodworking materials. It is equipped with a very fine tooth pitch (1.4 mm) for cutting very thin woodworking materials with 1.5-15 mm thickness.
For exact flush cuts and plunge cuts in wood, metal and plastics, eg cutting off stuck soft metal nails, making adjustment cuts in particle board and cutting plastic pipes to length
Thinner, harder saw blade for a faster and cleaner cut. With laser cut expansion slots to prevent blade warp and precision tensioning for superior blade flatness. Super micrograin carbide tips with titanium for maximum sharpness, strength and durability. Perma Shield coating to reduce heat, corrosion and resin build-up. Reduces kickback from feeding the saw too quickly. Designed with an average number of teeth ideal for cutting solid wood along the grain to a good finish.
The T 144 D delivers fast straight cuts in wood. Its sharp-ground, side-set teeth enable quick results. The high carbon steel blade material is appropriate for softwood and non-abrasive woodworking materials. Additionally, its large progressive tooth pitch (4-5.2 mm) enables the blade to cut a variety of wooden materials with 5-50 mm thickness.