Celotex GA4000 PIR Insulation Board 2400mm x 1200mm x 80mm
778046
Watch video
Hover Over to Zoom In
Overview
Excellent thermal performance with a thermal conductivity of 0.022 W/m.K, reducing the thickness of insulation required to hit the target U-value.
Low emissivity foil facing provides improved thermal performance in sealed cavity air spaces, improving the achievable U-value.
Celotex boards are light and rigid assisting with ease of transportation, handling and fitting.
Celotex GA4000 has been assessed by the BBA as fit for use in defined roof, wall and floor applications if installed, used and maintained as set out in the certificate. Please read the certification at insulation-UK.com/
BBA for full details and restrictions.
Celotex GA4000 achieves a BRE Green
Guide Rating of A, which can assist in
demonstrating environmental performance
in your BREEAM assessments . Please visit
the Celotex page at GreenBookLive.com for
further details.
Technical specification
Length
2400 mm
Thickness
80 mm
Width
1200 mm
Material
PIR
Coverage
2.88 m2
Fire Retardant
N
Acoustic
N
Thermal Conductivity
0.022 W/mK
Certifications Met
BBA Certificate Number 16/5352
BBA Certificate Number 17/5405
Recticel Eurowall® + is a premium, high performance full fill insulation board with precision cut tongue and groove joints on all four sides. This ensures that the boards lock tightly together minimising heat loss through thermal bridging. This unique joint offers increased protection against wind driven rain as well as improved windtightness.
Full fill cavity wall tongue & groove PIR insulation. Fibre free insulation core with aluminium foil composite to both sides. Engineered jointing system for superior fit. Suitable for full fill cavity wall applications, whilst maintaining a residual 10mm cavity helping resist moisture transfer, aids installation and accommodate mortar squeeze.
Flat roof insulation Insulation for use with hot applied roofing systems or adhered single ply systems. Fibre free rigid polyisocyanurate (PIR) insulation core faced with coated glass tissue on one side and bitumenised glass tissue with polypropylene fleece on the other.
Recticel Plylok® is a thermal insulation board for use in warm flat roofs under traditional bituminous waterproofing and single-ply waterproofing membranes. Plylok® consists of an insulation board bonded to a 6mm plywood top layer. It boasts high compressive strength and dimensional stability meaning it’s the ideal choice for contractors and installers for both new build and refurbishment projects.
Length
2400 mm
Thickness
116 mm
Width
1200 mm
Material
PIR
Usage
Warm flat roofs under built-up felt and single-ply waterproofing systems.
Recticel Eurowall® + is a premium, high performance full fill insulation board with precision cut tongue and groove joints on all four sides. This ensures that the boards lock tightly together minimising heat loss through thermal bridging. This unique joint offers increased protection against wind driven rain as well as improved windtightness.
Full fill cavity wall tongue & groove PIR insulation. Fibre free insulation core with aluminium foil composite to both sides. Engineered jointing system for superior fit. Suitable for full fill cavity wall applications, whilst maintaining a residual 10mm cavity helping resist moisture transfer, aids installation and accommodate mortar squeeze.
Flat roof insulation Insulation for use with hot applied roofing systems or adhered single ply systems. Fibre free rigid polyisocyanurate (PIR) insulation core faced with coated glass tissue on one side and bitumenised glass tissue with polypropylene fleece on the other.
Recticel Plylok® is a thermal insulation board for use in warm flat roofs under traditional bituminous waterproofing and single-ply waterproofing membranes. Plylok® consists of an insulation board bonded to a 6mm plywood top layer. It boasts high compressive strength and dimensional stability meaning it’s the ideal choice for contractors and installers for both new build and refurbishment projects.