Pristine Standard Blue 2ply Centrefeed 150m is absorbent and versitile. Made from recycled fibres, the perfect cost-effective product for tackling light-duty wiping and spillages.
Size: 150M
Colour: Blue
Case of 6
Manufactured in the UK, according to CHSA Soft Tissue Standard.
Soft to touch tissue made from quality 100% recycled fibres.
Rolls are designed with removable core. Paper inside remains clean and hygienic.
Be ready to scrub or clean a variety of surfaces with this Minotaur wire brush set. The twin pack includes two wire brushes with a choice of steel or brass-coated bristles – equipping you for a wide range of tasks.
The steel wire brush is perfect for cleaning rust and removing paint. This abrasive brush is also used to remove build-ups of dirt and grime, and to create a better conductive area for attaching electrical connections – particularly between car battery posts and their connectors.
Need to avoid marking, damage or sparks? The brass-coated wire brush is ideal for softer surfaces – or for when you need to clean a harder surface without marring it. It’s suitable for cleaning spark plugs, battery terminals, alloys, internal window stays and metalwork.
RLT BACTDET 05 is the first stage of MGC's Mould Eradication Treatment and used for killing and removing mould from contaminated surfaces. The product is soapy in consistency and supplied in concentrated form in 1 and 5 litre containers which should be diluted at 1:4 with warm or cold water. Apply the diluted product by brush, cloth or sponge to the infected surfaces extending the treatment 1 metre beyond visible signs of mould removing as much of the contamination as possible. This stage of the treatment will kill the mould, stop it spreading to other areas and clean the surfaces.
Size
1 L
Suitable for
Interior walls and ceilings
Interior or Exterior Use
Interior use
Container Type
Plastic bottle
Application Method
Cloth, sponge or brush
Type
Concentrate
Pack Quantity
1
Certifications Met
Approved under C.O.P.R.1986 (as amended) by the Health and Safety Executive Registration No 8144
The render’s ability to distribute and resist stresses can be enhanced by the inclusion of glass fibre reinforcement mesh cloth at positions of localised high stress i.e. at the corners of openings, at junctions of differing materials or around crack inducers such as weep holes.
Pristine Standard Blue 2ply Centrefeed 150m is absorbent and versitile. Made from recycled fibres, the perfect cost-effective product for tackling light-duty wiping and spillages.
Size: 150M
Colour: Blue
Case of 6
Manufactured in the UK, according to CHSA Soft Tissue Standard.
Soft to touch tissue made from quality 100% recycled fibres.
Rolls are designed with removable core. Paper inside remains clean and hygienic.
Be ready to scrub or clean a variety of surfaces with this Minotaur wire brush set. The twin pack includes two wire brushes with a choice of steel or brass-coated bristles – equipping you for a wide range of tasks.
The steel wire brush is perfect for cleaning rust and removing paint. This abrasive brush is also used to remove build-ups of dirt and grime, and to create a better conductive area for attaching electrical connections – particularly between car battery posts and their connectors.
Need to avoid marking, damage or sparks? The brass-coated wire brush is ideal for softer surfaces – or for when you need to clean a harder surface without marring it. It’s suitable for cleaning spark plugs, battery terminals, alloys, internal window stays and metalwork.
RLT BACTDET 05 is the first stage of MGC's Mould Eradication Treatment and used for killing and removing mould from contaminated surfaces. The product is soapy in consistency and supplied in concentrated form in 1 and 5 litre containers which should be diluted at 1:4 with warm or cold water. Apply the diluted product by brush, cloth or sponge to the infected surfaces extending the treatment 1 metre beyond visible signs of mould removing as much of the contamination as possible. This stage of the treatment will kill the mould, stop it spreading to other areas and clean the surfaces.
The render’s ability to distribute and resist stresses can be enhanced by the inclusion of glass fibre reinforcement mesh cloth at positions of localised high stress i.e. at the corners of openings, at junctions of differing materials or around crack inducers such as weep holes.