Categories
Basket

JG Speedfit emergency shut off tap 15mm Pack 5

955212
Check live branch stock

Overview

Speedfit push-fit valve for the connection of plastic and copper pipe. The valve allows the user to stop the flow of water to a fixture or zone in case of emergency or repair. Simply push the valve fully onto the pipe and turn the knob on top of the fitting to allow or with strict the flow of water. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release. Installation can be reduced by around 40% against traditional fixing methods. Designed, manufactured and assembled in the UK by John Guest Speedfit.
  • BSI, BBA and WRAS approved
  • Conforms to ISO 14001 and accredited by British Gas Service and Energy Savings Trust
  • Assessed by B.S.I. to BS EN ISO 9001
  • Kitemarked to BS 7291 Part 1 2 and 3 Class S licence no. KM39767
  • Installation time can be reduced by around 40 percent against traditional fixing methods
  • Reusable components makes this system flexible and cost effective
  • Not suitable for use on central heating systems
  • No build-up of scale that can degrade the water system
  • Hot and cold water use only, maximum 65 degree celsius
  • Lead-free, non-toxic and corrosion free

Technical specification

Diameter
15 mm
Material
Plastic
Colour
White
Finish
Plastic
Type
Taps & Valves
Made To Order
N
Manufacturer Model No
15ESOT
Country Origin
United Kingdom
Brand Name
JG Speedfit

Reviews

£39.66
per bag (Inc. VAT)
Enter your postcode to check availability
Related products
High quality PlumbRight lever ball valve with a red handle to indicate hot water supply, Compression ends manufactured to BS EN 1252-3 and WRAS approved. Lever ball valves enables an easy adjustment of the water flow where being parallel to the pipe will allows a full flow through the valve, adjusting to be perpendicular to the pipe will block the flow of water. Moving the lever between 0 and 90 degrees controls the flow. (Avalible in red, blue & yellow).
Diameter
22 mm
Colour
Red
Finish
Chrome
Type
Ball Valves
Brand Name
PlumbRight
Show More
£10.14
each (Inc. VAT)
Compression Tank Connector 15mm fittings can used on a wide range of applications including central heating and hot & cold water supplies.
Made To Order
N
Brand Name
Travis Perkins
Manufacturer Model No
P9211
Suitable for
Water
Diameter
15 mm
Connection Type
Compression
Material
Brass
Years Guaranteed
5
Type
Compression Sundries
Show More
£25.74
per pack (Inc. VAT)
4.4 (7 reviews)
Speedfit lengths of barrier pipe are rigid making them easy to handle on site. Manufactured in the UK by John Guest Speedfit. The pipe is ideal for short runs where a harder pipe material is an advantage. The pipe is made of 5 layers, the center of which is a blue coloured oxygen barrier which prevents the ingress of air into the system, reducing the effect of corrosion on metal components. Due to its low thermal conductivity, when carrying hot water, Speedfit Pipe is cooler and therefore safer to touch. Note: JG Speedfit pipe inserts must be used.
Made To Order
N
Brand Name
John Guest
Manufacturer Model No
15BPEX-25C
Country Origin
United Kingdom
Range Description
Barrier Pipe
Diameter
15 mm
Length
25 m
Connection Type
Push-Fit
Material
PEX
Colour
White
Years Guaranteed
25
Type
Barrier Pipe Coil
Show More
£41.75
each (Inc. VAT)
Easy to install and with proven performance, Hep2o is the primary solution for central heating systems and hot and cold water services, the use of coils in long lengths cuts down on labour time, reduces the risk of leaking joints, lightweight easy to transport and handle.
Made To Order
N
Brand Name
Wavin
Manufacturer Model No
HXX50/15W
Country Origin
United Kingdom
Range Description
Barrier Pipe
Diameter
15 mm
Length
50 m
Connection Type
Push-Fit
Material
Polybutylene
Colour
White
Finish
Streamlined
Years Guaranteed
50
Type
Barrier Pipe Coil
Show More
£107.99
each (Inc. VAT)
Plumbright Red Handle Lever Ball Valve - 22mm
Plumbright Red Handle Lever Ball Valve - 22mm
High quality PlumbRight lever ball valve with a red handle to indicate hot water supply, Compression ends manufactured to BS EN 1252-3 and WRAS approved. Lever ball valves enables an easy adjustment of the water flow where being parallel to the pipe will allows a full flow through the valve, adjusting to be perpendicular to the pipe will block the flow of water. Moving the lever between 0 and 90 degrees controls the flow. (Avalible in red, blue & yellow).
Show More
£10.14 each (Inc. VAT)
Quick view
Tank Connector Compression 15mm Pack 5
Tank Connector Compression 15mm Pack 5
Compression Tank Connector 15mm fittings can used on a wide range of applications including central heating and hot & cold water supplies.
Show More
£25.74 per pack (Inc. VAT)
Quick view
JG Speedfit PEX barrier pipe coil 15mm x 25m
JG Speedfit PEX barrier pipe coil 15mm x 25m
Speedfit lengths of barrier pipe are rigid making them easy to handle on site. Manufactured in the UK by John Guest Speedfit. The pipe is ideal for short runs where a harder pipe material is an advantage. The pipe is made of 5 layers, the center of which is a blue coloured oxygen barrier which prevents the ingress of air into the system, reducing the effect of corrosion on metal components. Due to its low thermal conductivity, when carrying hot water, Speedfit Pipe is cooler and therefore safer to touch. Note: JG Speedfit pipe inserts must be used.
Show More
£41.75 each (Inc. VAT)
Quick view
Hep2O Barrier Pipe Coil Push-Fit 15mm x 50m
Hep2O Barrier Pipe Coil Push-Fit 15mm x 50m
Easy to install and with proven performance, Hep2o is the primary solution for central heating systems and hot and cold water services, the use of coils in long lengths cuts down on labour time, reduces the risk of leaking joints, lightweight easy to transport and handle.
Show More
£107.99 each (Inc. VAT)
Quick view