Hep2O Flexible Tap Connector Valve 300mm X 15mm X 1/2 HD125E/15W Qty 2
Hover Over to Zoom In
Overview
- BS EN 7291 parts 1 and 2, WRAS approved
- For intermittent hot and cold water use up to a maximum of 65°C
- Hot and cold flexible push-fit plumbing system
- In4Sure joint recognition for secure joints
- Feel the rumble, leak free connection guaranteed
- Secure demounting with HepKey system
- 50 year industry leading guarantee
- Colour-coded packaging for easy identification - green 10mm, blue 15mm, purple 22mm and orange 28mm
- BS EN 7291 parts 1 and 2, WRAS approved
Technical specification
Diameter
15 mm
Length
300 mm
Thread Size
1/2"
Connection Type
Push-fit x Push-fit
Material
PB
Maximum Pressure
18 bar
Colour
Stainless Steel
Finish
Streamlined
Years Guaranteed
50
Type
Tap Connectors
Pack Quantity
2
Made To Order
N
Manufacturer Model No
HD125E/15W
Country Origin
United Kingdom
Brand Name
Hep2O
Range Description
Flexible Connectors
Reviews
Be the first to review this product.
15mm Straight Isolating Valve Chrome
High quality isolating valve is WRAS approved and leak tested. The valve can be opened and closed using a screwdriver to cut off the water supply so that essential repairs can be carried out.
£1.31 each (Inc. VAT)
Altecnic 15mm Pressure Reducing Valve Complete with Gauge 533841H
The Altecnic pressure reducing valve has been designed to provide complete control of inlet pressures up to 12 bar. It covers the use of hot or cold water for domestic and semi commercial applications and is WRAS approved.
£45.95 each (Inc. VAT)
Red Handle Lever Ball Valve - 22mm
High quality lever ball valve with a red handle to indicate hot water supply, COMPRESSION ends manufactured to BS EN 1252-3 and WRAS apoved. Lever ball valves enables an easy adjustment of the water flow where being parallel to the pipe will allows a full flow through the valve, adjusting to be perpendicular to the pipe will block the flow of water. Moving the lever between 0 and 90 degrees controls the flow. (Avalible in red, blue & yellow).
£13.34 each (Inc. VAT)
15mm x 300mm Compression x 1/2 Inch Tap Connector
This hose is ideal for the connection of taps. To isolate the appliance simply turn the handle on the valve a 1/4 turn. To make a connection simply push the fitting fully on to the pipe and screw the nut onto the thread of the appliance. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods.
£6.13 per pair (Inc. VAT)