Delivery address
Collection branch
Ideas & Advice
VAT
EX
INC
IMPORTANT INFORMATION
Please be aware that we will be performing scheduled maintenance on our website from 12:00pm BST on Saturday, May 3rd until 9:00am BST on Monday, May 5th. During this time, our website will be temporarily unavailable. We apologise for any inconvenience this may cause.
Hep2O Flexible Tap Connector Monobloc Mixers 300mm x 15mm x M10 HD125F/15W Qty 2
Hover Over to Zoom In
Overview
- BS EN 7291 parts 1 and 2, WRAS approved
- Hot and cold flexible push-fit plumbing system
- In4Sure joint recognition to ensure secure joint
- Secure demounting with HepKey system
- 50 year industry leading guarantee
- Colour-coded packaging for easy identification - green 10mm, blue 15mm, purple 22mm and orange 28mm
- For intermittent hot and cold water use up to a maximum of 65°C
Technical specification
Diameter
15 mm
Length
300 mm
Thread Size
M10
Connection Type
Push-fit x Monobloc
Material
PB
Maximum Pressure
18 bar
Colour
Stainless Steel
Finish
Streamlined
Years Guaranteed
50
Type
Tap Connectors
Pack Quantity
2
Made To Order
N
Manufacturer Model No
HD125F/15W
Brand Name
Hep2O
Range Description
Flexible Connectors
Reviews
Be the first to review this product.
JG Speedfit flexible hose 22mm x 3/4inch 500mm
Speedfit push-fit flexi hose for the connection of plastic and copper pipe to a male thread appliance. Connectors use a grip then seal collet arrangement. This hose is ideal for the connection of taps. Simply push the fitting fully on to the pipe and screw the nut on to the thread of the appliance. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Note: With all plastic pipes the relevant manufacturer’s pipe insert is required.
£12.13 each (Inc. VAT)
JG Speedfit flexible hose 15 x 15mm - 300mm
Speedfit push-fit flexi hose for the connection of plastic and copper pipe. This hose is ideal for the connection of two pipes where the angle is too steep to bend pipe to make a connection. Simply push the fitting fully on to the pipe. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods. Note: With all plastic pipes the relevant manufacturer’s pipe insert is required.
£9.95 each (Inc. VAT)
Hep2o Flexible Tap Connector 15mmx3/4x300mm Length HD125B/15W
Hep2o is the primary solution for central heating systems and hot and cold water services
£5.98 each (Inc. VAT)