Your Trade Prices
Log in to view your exclusive prices
Hep2O HD125G/15W Flexible Tap Connector Monobloc Mixers 300mm x 15mm x M12
Hover Over to Zoom In
Overview
Push-fit braided flexible tap connector with Monobloc Mixers for easy jointing.
- BS EN 7291 parts 1 and 2, WRAS approved
- Hot and cold flexible push-fit plumbing system
- In4Sure joint recognition to ensure secure joint
- Secure demounting with HepKey system
- 50 year industry leading guarantee
- Colour-coded packaging for easy identification - green 10mm, blue 15mm, purple 22mm and orange 28mm
- For intermittent hot and cold water use up to a maximum of 65°C
Technical specification
Diameter
15 mm
Length
300 mm
Thread Size
M12
Connection Type
Push-fit x Monobloc
Material
PB
Maximum Pressure
18 bar
Colour
Stainless Steel
Finish
Streamlined
Years Guaranteed
50
Type
Tap Connectors
Pack Quantity
2
Made To Order
N
Manufacturer Model No
HD125G/15W
Brand Name
Hep2O
Range Description
Flexible Connectors
Reviews
22mm Comp x 3/4 inch Tap Conn x 30cm
This hose is ideal for the connection of taps. To isolate the appliance simply turn the handle on the valve a 1/4 turn. To make a connection simply push the fitting fully on to the pipe and screw the nut onto the thread of the appliance.
£4.36 each (Inc. VAT)
22mm Pipe Connector 3/4inch x 30cm
This hose is ideal for the connection of taps. To isolate the appliance simply turn the handle on the valve a 1/4 turn. To make a connection simply push the fitting fully on to the pipe and screw the nut onto the thread of the appliance.
£7.90 each (Inc. VAT)
Plumbright P/R 15mm Comp XM12 Mono Tails x 30cm (Pr)
This hose is ideal for the connection of taps. To isolate the appliance simply turn the handle on the valve a 1/4 turn. To make a connection simply push the fitting fully on to the pipe and screw the nut onto the thread of the appliance.
£5.63 per pair (Inc. VAT)
P/R 15mm Tap Connector 1/2inch x 30cm Pair
This hose is ideal for the connection of taps. To isolate the appliance simply turn the handle on the valve a 1/4 turn. To make a connection simply push the fitting fully on to the pipe and screw the nut onto the thread of the appliance. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods.
£8.98 per pair (Inc. VAT)