Categories
Basket

JG Speedfit flexible hose 15mm x 1/2inch 300mm - Bag of 5

941170
Check live branch stock

Overview

Speedfit push-fit flexi hose for the connection of plastic and copper pipe to a male thread appliance. Connectors use a grip then seal collet arrangement. This hose is ideal for the connection of taps. Simply push the fitting fully on to the pipe and screw the nut on to the thread of the appliance. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Note: With all plastic pipes the relevant manufacturer’s pipe insert is required.
  • Designed to withstand vibration and thermal expansion
  • Push-fit and demountable connection
  • It can only be used for hot and cold water at a pressure of 6 bar with the maximum temperature being 65-degree celsius
  • Not suitable for central heating system
  • Kitemarked to BS7291 Parts 1, 2 and 3
  • The Speedfit system should not be used on an uncontrolled heat source
  • WRAS approved

Technical specification

Diameter
15 mm
Length
300 mm
Thread Size
1/2"
Connection Type
Push-fit x BSP
Material
Braided Hose
Colour
Silver
Finish
Braided
Years Guaranteed
25
Type
Flexible Hoses
Made To Order
N
Manufacturer Model No
FLX15P
Brand Name
John Guest
Range Description
Flexible Connectors

Reviews

£35.94
per bag (Inc. VAT)
Enter your postcode to check availability
Related products
An angled valve to turn off the water supply from any fitting, so that essential repairs can be carried out.
Brand Name
Generic
Manufacturer Model No
H-03603
Diameter
15 mm
Material
Brass
Colour
Chrome
Finish
Chrome
Type
Isolating Valve
Show More
£4.38
each (Inc. VAT)
For a speedy system build use compression fittings.
Manufacturer Model No
G317B15
Made To Order
N
Brand Name
IDC Edison
Diameter
15 mm
Suitable for
Water
Connection Type
Compression
Material
Brass
Years Guaranteed
5
Type
Compression Elbow
Show More
£46.32
per bag (Inc. VAT)
For a speedy system build use compression fittings.
Brand Name
Travis Perkins
Made To Order
N
Diameter
15 mm
Suitable for
Water
Connection Type
Compression
Material
Brass
Years Guaranteed
1
Type
Compression Coupling
Show More
£3.07
each (Inc. VAT)
This hose is ideal for the connection of taps. To isolate the appliance simply turn the handle on the valve a 1/4 turn. To make a connection simply push the fitting fully on to the pipe and screw the nut onto the thread of the appliance. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods.
Range Description
P/R 15mm Comp Vlv x1/2inchTap Con x30Cm(Pr)
Country Origin
China
Manufacturer Model No
JLIV1512-30
Made To Order
Y
Brand Name
PlumbRight
Diameter
15 mm
Length
300 mm
Minimum Diameter
10 mm
Maximum Diameter
14 mm
Thread Size
G1/2"
Connection Type
F1/2 and 15mm compression with isolating valve
Material
Brass
Maximum Pressure
35 bar
Colour
natural
Finish
nickle plated
Years Guaranteed
5
Type
Flexible Tap Connector
Pack Quantity
50
Show More
£9.53
per pair (Inc. VAT)
Angled Service Valve Chrome 15mm x 1/2in
Angled Service Valve Chrome 15mm x 1/2in
An angled valve to turn off the water supply from any fitting, so that essential repairs can be carried out.
Show More
£4.38 each (Inc. VAT)
Quick view
Compression Backplate Elbow Fitting 15mm x 1/2in - Bag of 10
Compression Backplate Elbow Fitting 15mm x 1/2in - Bag of 10
For a speedy system build use compression fittings.
Show More
£46.32 per bag (Inc. VAT)
Quick view
Coupling Compression Fl 15mm x 1/2in
Coupling Compression Fl 15mm x 1/2in
For a speedy system build use compression fittings.
Show More
£3.07 each (Inc. VAT)
Quick view
P/R 15mm Tap Connector  1/2inch  x 30cm Pair
P/R 15mm Tap Connector 1/2inch x 30cm Pair
This hose is ideal for the connection of taps. To isolate the appliance simply turn the handle on the valve a 1/4 turn. To make a connection simply push the fitting fully on to the pipe and screw the nut onto the thread of the appliance. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods.
Show More
£9.53 per pair (Inc. VAT)
Quick view