Free Click & Collect
Within One Hour
Delivery address
Collection branch
Ideas & Advice
VAT
EX
INC
JG Speedfit monobloc flexible connector hose 15mm x M10 male
Hover Over to Zoom In
Frequently bought together
Overview
- Easy to install
- Suitable for use in confined places
- No tool installation
- Works very well in confined spaces and removes the need for on-site hot works
- Needs its own pipe inserts to work optimally
- Not suitable for central heating systems
- WRAS approved
- Conforms to BS 7291
- Kitemarked to KM39767
Technical specification
Diameter
15 mm
Length
300 mm
Thread Size
M10
Connection Type
Push-fit x Monobloc
Material
Braided Hose
Colour
Silver
Finish
Braided
Years Guaranteed
25
Type
Flexible Hoses
Made To Order
N
Country Origin
United Kingdom
Brand Name
John Guest
Range Description
Flexible Connectors
Reviews
Be the first to review this product.
JG Speedfit flexible hose 22mm x 3/4inch 500mm
Speedfit push-fit flexi hose for the connection of plastic and copper pipe to a male thread appliance. Connectors use a grip then seal collet arrangement. This hose is ideal for the connection of taps. Simply push the fitting fully on to the pipe and screw the nut on to the thread of the appliance. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Note: With all plastic pipes the relevant manufacturer’s pipe insert is required.
£13.73 each (Inc. VAT)
Hep2O Flexible Tap Connector 15mm x 3/4in x 500mm HD225B/15W
Push-fit braided flexible tap connector with brass nut and rubber washer for easy jointing.
£16.84 each (Inc. VAT)
Hep2O Flexible Tap Connector 300mm X 15mm X 15mm HD125H/15W Qty 2
Hep2o is the primary solution for central heating systems and hot and cold water services
£18.53 per pack (Inc. VAT)
15mm x 300mm Compression x 1/2 Inch Tap Connector
This hose is ideal for the connection of taps. To isolate the appliance simply turn the handle on the valve a 1/4 turn. To make a connection simply push the fitting fully on to the pipe and screw the nut onto the thread of the appliance. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods.
£5.54 per pair (Inc. VAT)