XPress fittings from Pegler Yorkshire make jointing easier, faster and more cost effective than other jointing methods - a fittings system which simply presses together in seconds to create a perfect joint, every time. XPress Copper Gas ensures that safety is paramount by offering swift, flame-free installation alongside assuring consistent high-quality and performance for your commercial gas system.
Speedfit push-fit fitting for the connection of plastic and copper pipe. The Stem Elbow allows a 90 degree male to female connection making it the perfect coupler for appliances such as cold water storage tanks. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods. Note: will all plastic pipes the relevant manufacturer’s pipes insert is required. Designed, manufactured and assembled in the UK by John Guest Speedfit.
Speedfit push-fit fitting for the connection of plastic and copper pipe. The Stem Elbow allows a 90 degree male to female connection making it the perfect coupler for appliances such as cold water storage tanks. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods. Note: will all plastic pipes the relevant manufacturer’s pipes insert is required. Designed, manufactured and assembled in the UK by John Guest Speedfit.
The 533 series is specially designed for hot and cold services in houses or apartments to equalise the hot or cold water supplies or both and prevent excessive pressure at outlets such as taps and showers.
The series 533 range of pressure reducing valves is designed for domestic and semi commercial applications. Pressure reducing valves are installed in residential water systems to reduce and stabilise inlet pressures from mains water supplies or boosted wa
XPress fittings from Pegler Yorkshire make jointing easier, faster and more cost effective than other jointing methods - a fittings system which simply presses together in seconds to create a perfect joint, every time. XPress Copper Gas ensures that safety is paramount by offering swift, flame-free installation alongside assuring consistent high-quality and performance for your commercial gas system.
Speedfit push-fit fitting for the connection of plastic and copper pipe. The Stem Elbow allows a 90 degree male to female connection making it the perfect coupler for appliances such as cold water storage tanks. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods. Note: will all plastic pipes the relevant manufacturer’s pipes insert is required. Designed, manufactured and assembled in the UK by John Guest Speedfit.
Speedfit push-fit fitting for the connection of plastic and copper pipe. The Stem Elbow allows a 90 degree male to female connection making it the perfect coupler for appliances such as cold water storage tanks. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods. Note: will all plastic pipes the relevant manufacturer’s pipes insert is required. Designed, manufactured and assembled in the UK by John Guest Speedfit.
The 533 series is specially designed for hot and cold services in houses or apartments to equalise the hot or cold water supplies or both and prevent excessive pressure at outlets such as taps and showers.
The series 533 range of pressure reducing valves is designed for domestic and semi commercial applications. Pressure reducing valves are installed in residential water systems to reduce and stabilise inlet pressures from mains water supplies or boosted wa