Highly workable buttery mix obtained every time, long board life
Dries to light grey colour
Pre-Mixed, Just Add Water
Weather resistant resealable tub
Improved workability and water retention
Improved quality of bond to substrates
Reduced potential for water penetration
Improved ability to withstand normal movement (e.g. thermal expansion and contraction, creep) without excesive cracking or debonding
Technical specification
Made To Order
N
Brand Name
Blue Circle
Size
5 kg
Coverage
0.00338m3 per bucket
Colour
Light grey
Drying Time
Typically 2 hours, but dependent on ambient conditions
Time to Set
Approx 2 hours
Package Type
Resealable Tub
Type
Mortar
Certifications Met
CE Mark EN 998-2 Prescribed General Purpose Mortar 1:1:5-6 Cement:Lime:Sand
UKCA Mark EN 998-2 Prescribed General Purpose Mortar 1:1:5-6 Cement:Lime:Sand
Sulfacrete is particularly suitable for reducing damage to concrete, mortar and grout exposed to sulphate attack and minimising the risk of alkali silica reaction, reducing the thermally-induced stresses in large pours, concrete exposed to the marine environment. Sulfacrete is a low-alkali Portland-fly ash cement that conforms to the requirements of BS EN 197-1 CEM II/B-V 32,5R. This cement is classified by BS 8500 with a +SR suffix, signifying enhanced sulphate resistance.
A Portland cement containing calcium aluminate to Extra Rapid gives rapid hardening and setting properties for repair and maintenance where rapid hardening is required, eg, setting manholes, repairs to paths and steps, Suitable for concrete, mortar, rendering and floor screeds. Extra Rapid takes foot traffic in 4-6 hours and vehicular traffic in 8-12 hours.
Bostik Rapid Setting Cement is a versatile product that is ideal for a variety of interior and exterior installation, repair, and maintenance projects. It is particularly well-suited for the installation of sanitary fittings, drainage systems, and the upkeep of concrete floors, paths, and steps.
A first class hard, durable finishing plaster designed for use over Limelite backing coats as well as traditional gypsum plasters and sand cement mixes. Equally at home providing a quality finish for heritage renovation projects, or for use on public buildings such as schools and hospitals.
Size
25 kg
Material
Gypsum Plaster
Colour
Off White
Time to Set
1.5 hrs
Usage
Suitable for all areas which require superior impact resistance and greater durability eg. Schools, Hospitals and other Public Buildings
Sulfacrete is particularly suitable for reducing damage to concrete, mortar and grout exposed to sulphate attack and minimising the risk of alkali silica reaction, reducing the thermally-induced stresses in large pours, concrete exposed to the marine environment. Sulfacrete is a low-alkali Portland-fly ash cement that conforms to the requirements of BS EN 197-1 CEM II/B-V 32,5R. This cement is classified by BS 8500 with a +SR suffix, signifying enhanced sulphate resistance.
A Portland cement containing calcium aluminate to Extra Rapid gives rapid hardening and setting properties for repair and maintenance where rapid hardening is required, eg, setting manholes, repairs to paths and steps, Suitable for concrete, mortar, rendering and floor screeds. Extra Rapid takes foot traffic in 4-6 hours and vehicular traffic in 8-12 hours.
Bostik Rapid Setting Cement is a versatile product that is ideal for a variety of interior and exterior installation, repair, and maintenance projects. It is particularly well-suited for the installation of sanitary fittings, drainage systems, and the upkeep of concrete floors, paths, and steps.
A first class hard, durable finishing plaster designed for use over Limelite backing coats as well as traditional gypsum plasters and sand cement mixes. Equally at home providing a quality finish for heritage renovation projects, or for use on public buildings such as schools and hospitals.