Built using high quality materials including a glass reinforced polyamide resin body and die-cast aluminum gear casing, the G12STX offers performance and durability. Weighing in at just 1.4kg and measuring only 254mm (10 in) long, the G12STX allows for optimal control while providing a high power to weight ratio.
With a 580W motor, the G12STX is perfect for the grinding of metal or masonry, paint and rust removal, or sanding. With a low profile head and compact body, the G12STX gets into the tightest corners, while a small grip perimeter and forward canted side handle add comfort and reduce user fatigue.
Externally accessible brushes for effortless maintenance on the job site.
Disc Diameter
115 mm
Bore Size
22.23 mm
Grinding Spindle Thread
M14 x 2
Length
254 mm
Weight
3.6 kg
No Load Speed
12,000 rpm
Power Type
Cordless
Wattage
600 W
Voltage
110V
Noise Sound Power
99 dB(A)
Noise Sound Pressure
88 dB(A)
Noise K Factor
3 dB(A)
Vibration Artificial Wheel
7.9 M/S2
Vibration K Factor
5.1 M/S2
Includes
1 x HiKOKI G12STX 115mm Angle Grinder (110V)1 x Diamond Edge Cutting Blade 1 x Adjustable Protective Guard1 x Side Handle 1 x Two-Pin Spanner Wrench 1 x Inner and Outer Disc Flanges1 x Heavy-Duty Plastic Carry Case
The V-TUF RAPID-VSC is a compact, stainless-steel hot-water pressure washer built to tackle the toughest grease, grime, and soft wash cleaning jobs�?delivering powerful results with minimal maintenance and maximum reliability.
The TE-MG 200 CE multifunction tool is a high-quality, compact and ergonomic. Ideal for sawing, sanding, scraping and much more, all of which are performed easily and speedily with this handy all-rounder. The electronic speed control ensures smooth starting and enables the power to be adjusted exactly to the particular task.
The Milwaukee M18 FUEL 18V Generation 4 system is equipped with two 5.0Ah LI-ION Redlithium batteries. The model M18FPD3 demonstrates superior power efficiency under load, providing a torque output of 158 Nm while maintaining a compact length of 175 mm, facilitating access to confined spaces. The 13 mm metal chuck enables rapid bit changes and enhances bit retention, while the AUTOSTOPâ„¢ control mode improves operator safety by preventing excessive rotation during a bind-up scenario.
1 x M18 FPD3 FUELâ„¢ Gen 4 13mm Percussion/Combi Hammer Drill 1 x M18 FID3 FUELâ„¢ Gen 4 1/4" Hex Impact Driver 2 x M18 B5 18V 5.0Ah REDLITHIUMâ„¢ Battery Packs 1 x M12-18FC Dual-Voltage Rapid Battery Charger (Charges an M18 5.0Ah battery in ~59 minutes) 1 x Heavy-Duty Blow-Moulded Carry Case (Dynacase/HD Box) 1 x Side Handle (for the Combi drill), all-metal reversible belt clips, and bit holders
Built using high quality materials including a glass reinforced polyamide resin body and die-cast aluminum gear casing, the G12STX offers performance and durability. Weighing in at just 1.4kg and measuring only 254mm (10 in) long, the G12STX allows for optimal control while providing a high power to weight ratio.
With a 580W motor, the G12STX is perfect for the grinding of metal or masonry, paint and rust removal, or sanding. With a low profile head and compact body, the G12STX gets into the tightest corners, while a small grip perimeter and forward canted side handle add comfort and reduce user fatigue.
Externally accessible brushes for effortless maintenance on the job site.
The V-TUF RAPID-VSC is a compact, stainless-steel hot-water pressure washer built to tackle the toughest grease, grime, and soft wash cleaning jobs�?delivering powerful results with minimal maintenance and maximum reliability.
The TE-MG 200 CE multifunction tool is a high-quality, compact and ergonomic. Ideal for sawing, sanding, scraping and much more, all of which are performed easily and speedily with this handy all-rounder. The electronic speed control ensures smooth starting and enables the power to be adjusted exactly to the particular task.
The Milwaukee M18 FUEL 18V Generation 4 system is equipped with two 5.0Ah LI-ION Redlithium batteries. The model M18FPD3 demonstrates superior power efficiency under load, providing a torque output of 158 Nm while maintaining a compact length of 175 mm, facilitating access to confined spaces. The 13 mm metal chuck enables rapid bit changes and enhances bit retention, while the AUTOSTOPâ„¢ control mode improves operator safety by preventing excessive rotation during a bind-up scenario.