I used the product to clean an open vent heating system. It works well and, as detailed on the instructions, it does complete the process in about an hour.
5 years ago
John
0
0
5
I would buy again
Had previously used X400 but it made no difference to the system. this X800 made a significant difference and worked really well
6 years ago
Ron
1
0
5
Great price
Great price
6 years ago
anthony
1
0
5
I would buy this again.
I am using Sentinel X800 to clean out the corrosion from my CH system after finding that there were two dead piping legs which had been connected to a cast iron back boiler. I have removed each radiator in turn and flushed them through outside before installing the Sentinel. I have a Spiraflow filter in the system and clean that out every week at the moment. It is amazing how much rubbish comes out.
The V4073A Valve has been designed to control the flow of water in domestic central heating systems, where both radiator and hot water cylinder circuits are pumped. It is typically suited for small to medium sized installations
The L641 is a water temperature thermostat designed for surface mounting on domestic hot water cylinders, it is supplied complete with mounting strap for rapid and easy installation, so draining of the system or tapping the cylinder is not necessary.
The T6360 is a mains voltage Room Thermostat designed to give automatic temperature control of domestic wet central heating systems. It can be used to directly switch a circulating pump or boiler, or to operate spring return and motor open/motor close zone valves
MC3+ is a rapid performing, and powerful chemical cleaner specifically designed to remove central heating system sludge, and debris. The MC3+ starts to work as quickly as one hour after application, and for maximum flexibility, it can be left in the system for up to 28 days.
The V4073A Valve has been designed to control the flow of water in domestic central heating systems, where both radiator and hot water cylinder circuits are pumped. It is typically suited for small to medium sized installations
The L641 is a water temperature thermostat designed for surface mounting on domestic hot water cylinders, it is supplied complete with mounting strap for rapid and easy installation, so draining of the system or tapping the cylinder is not necessary.
The T6360 is a mains voltage Room Thermostat designed to give automatic temperature control of domestic wet central heating systems. It can be used to directly switch a circulating pump or boiler, or to operate spring return and motor open/motor close zone valves
MC3+ is a rapid performing, and powerful chemical cleaner specifically designed to remove central heating system sludge, and debris. The MC3+ starts to work as quickly as one hour after application, and for maximum flexibility, it can be left in the system for up to 28 days.