Free Click & Collect
Within One Hour
Delivery address
Collection branch
Ideas & Advice
VAT
EX
INC
Safeguard Drybase TS-Plus Polymer Tanking Kit 12kg
Hover Over to Zoom In
Frequently bought together
Overview
- Pre-dosed, easy-to-mix two-part system for fast application
- Resists water pressure up to 5 bar (50 metres depth)
- Enhances adhesion and crack resistance with polymer modification
- Suitable for use on concrete, blockwork, slabs and retaining walls
- Conforms to BS 8102:2022 for Type A waterproofing
- Covers up to 2.5 m2 per 12 kg kit when applied in two coats
Technical specification
Size
12kg
Interior or Exterior Use
Interior
Coverage per Litre
Pressureless water: 3.5 – 4.5 kg/m², water under pressure: 3.5 – 5.5 kg/m²
Drying Time
2 - 4 hours
Time to Full Cure
7 - 14 days
VOC Level
Minimal 0-0.29%
Colour
Grey
Type
Tanking Slurry
Manufacturer Model No
FG-A00174-001
Brand Name
Drybase
Data sheets
Reviews
Be the first to review this product.
Safeguard Stormdry XR-Mortar 310ml
Stormdry XR-Mortar is a semi-flexible polymer modified crack filling mortar for masonry. It can be used to seal cracks in bricks and masonry joints to prevent rain penetration or to repoint damaged areas of pointing in both internal and external environments. It is applied directly to the damaged area using a cartridge gun and nozzle to provide a waterproof barrier. It can also be used to plug damp proof course holes.
£22.31 each (Inc. VAT)
Safeguard Dryrod Damp Proofing Rods Kit 6M BBA Approved
Kit contains: x1 Dryrod 50 Box x1 Dryzone System Hole Clearing Tool - x1 Dryzone System Rod Cutting Tool- x1 Dryzone Drill Bit - 12mm x 300mm - x1 Stormdry Xr Mortar - No fuss, no mess, no stress. Dryrod is the next generation of rising damp treatment developed by Safeguard Europe Ltd. The patented, BBA approved 12mm diameter DIY damp proofing rods carry a powerful water repellent material, which cures to form a powerful barrier to rising damp. Once they are inserted, the rods will start to dry out the wall by slowly diffusing water repellent deep into the damp masonry, curing to form a powerful barrier to further rising damp. Installation: Simply insert the 9" rods into a series of 12mm holes drilled into the lowest available continuous mortar course of the wall. No specialist pumps or mastic guns required. A normal hammer drill will suffice. Once installed they diffuse the active ingredient deep into the wall before it cures to form a water-repellent chemical damp course. Advantages over other methods: The most effective rising damp treatment available - Proven to work even up to 95% saturation Quick & easy to install DIY rising damp treatment - Simply drill holes & insert the damp-proofing rods to form a new chemical damp course. No mess to clean up - The active ingredient is contained within the rods so there's no chance of messy spillages that occur with other solutions for damp proofing for walls.
£148.32 each (Inc. VAT)
Safeguard Dryzone Mould Eliminator 5L
Dryzone Mould Eliminator is a bleach-based and hygienic surface cleaner designed to quickly remove mould and mildew from household surfaces. Ideal for use in bathrooms and kitchens, spray directly onto mould and mildew affected surfaces. Once applied, the powerful formula acts immediately and usually eliminates mould in less than three minutes before being washed away to reveal a clean and mould-free surface.
£43.66 each (Inc. VAT)
Safeguard Drybase Construction Joint Tape 180mm X 30m
Drybase Construction Joint Tape is a synthetic rubber strip, approximately 0.7 mm thick. It is covered on both sides with an alkaliresistant and flexible polyester fabric mat, which forms a web on the edges. The combined properties of the fabric mat and synthetic rubber ensure a strong bond with the concrete surface, maintaining excellent elasticity of the tape.
£103.38 each (Inc. VAT)