A quick drying solution for sealing knots and sap streaks in wood, preventing the resinous sap from bleeding through and damaging and discolouring paint or varnish finishes
Touch dry in 5-10 minutes, recoatable after 30 minutes under normal conditions
Ronseal Trade Polyurethane Varnish is a traditional solvent based varnish that provides tough protection against knocks, scuffs and scratches.
Ensure the room is warm and well-ventilated. Sand the wood in the direction of the grain using 120 grit paper. Wear a suitable mask to avoid the inhalation of dust. Wipe away dust with white spirit and allow to dry. Always use a good quality, soft bristle brush. Stir the varnish thoroughly. Apply 3 coats leaving 6 hours between coats. Lightly sand with 240 grit paper and remove dust prior to application of the final coat.
Size
0.75 L
Suitable for
Suitable for providing tough protection against knocks, scuffs and scratches.
A top quality high opacity emulsion based on unique AkzoNobel technology which gives excellent coverage and application as well as a durable finish which lasts everyday living.
Colour Family
Creams
Colour
Gardenia
Finish
Matt
Size
5 L
Application Method
Brush, Roller or Spray
Interior or Exterior Use
Interior
Coverage per Litre
Up to 17 m²
Drying Time
Dependent on temperature/humidity
Drying time between coats
2 - 4 hrs
Clean equipment with
After use, remove as much paint as possible from equipment before cleaning with water
ProSolve PVSMG7A Site Marker Aerosol, 750ml, Green. The ProSolve Site Marker is an economical and multifunctional aerosol-based line marking paint. Its rapid-drying, high-resistance formulation (formulated without lead and xylene) is suitable for precise marking on diverse substrates such as concrete, tarmac, timber, and composite materials.
A classic universal interior and exterior, water-based, primer-sealer. It offers low odour application, quick drying convenience and excellent adhesion to glossy surfaces.
Ronseal Trade Polyurethane Varnish is a traditional solvent based varnish that provides tough protection against knocks, scuffs and scratches.
Ensure the room is warm and well-ventilated. Sand the wood in the direction of the grain using 120 grit paper. Wear a suitable mask to avoid the inhalation of dust. Wipe away dust with white spirit and allow to dry. Always use a good quality, soft bristle brush. Stir the varnish thoroughly. Apply 3 coats leaving 6 hours between coats. Lightly sand with 240 grit paper and remove dust prior to application of the final coat.
A top quality high opacity emulsion based on unique AkzoNobel technology which gives excellent coverage and application as well as a durable finish which lasts everyday living.
ProSolve PVSMG7A Site Marker Aerosol, 750ml, Green. The ProSolve Site Marker is an economical and multifunctional aerosol-based line marking paint. Its rapid-drying, high-resistance formulation (formulated without lead and xylene) is suitable for precise marking on diverse substrates such as concrete, tarmac, timber, and composite materials.
A classic universal interior and exterior, water-based, primer-sealer. It offers low odour application, quick drying convenience and excellent adhesion to glossy surfaces.