H+H Celcon Brick Standard Coursing Unit 65mm
Hover Over to Zoom In
Overview
Coursing Units are produced from the same material as all H+H aircrete and are suitable for the same applications as conventional size Celcon Blocks, allowing consistency within the building fabric.
- They are suitable for use both externally and internally in load-bearing and non load-bearing situations.
- Load-bearing walls should not be constructed of Coursing Units as the only masonry unit.
- Protect against cold bridging
- Infill above doors and windows
- Coursing at floor and ceiling level
- Making up between joist
Technical specification
Height
65 mm
Length
215 mm
Width
100 mm
Weight
1.10 kg
Colour
Grey
Thermal Conductivity
0.15 W/mK
Compressive Strength
4 N per mm2
Fire Rating
Class A1
BBA Approved
Yes
Type
Coursing Unit
Made To Order
N
Manufacturer Model No
SCP100300
Brand Name
Celcon
Data sheets
Reviews
Be the first to review this product.
H+H Celcon Hi-7 Aerated Concrete Block 7.3N 100mm
H+HÕs Celcon Blocks High Strength Grade (7.3N/mm2 Ð identified with a black stripe on the block) is ideal where higher compressive strengths are required such as in the foundations and lower storeys of three storey buildings, piers under high vertical loads and in multi-storey buildings.
£2.76 each (Inc. VAT)
H+H Celcon Solar Aerated Concrete Block 2.9N 100mm Pack of 120
This highly efficient block (thermal conductivity of just 0.11 W/mK) is sufficiently loadbearing for two storey buildings and can be used below DPC. Identified by the distinctive painted blue line, Celcon Solar Grade has a compressive strength of 2.9N/mm2 and is principally used where enhanced thermal performance is required.
£212.82 per pack (Inc. VAT)
Solid Dense 7.3N Concrete Block Grey 100mm
This solid, dense concrete block from Aggregate Industries is suitable for cavity or solid wall constructions, internal load bearing walls and beam and block flooring. Water resistant with sound insulation properties.
£2.08 each (Inc. VAT)
Weinerberger Solid Blue Class A Engineering Brick 65mm - Pack of 400
The high compressive strength and low water absorption properties and guaranteed durability of engineering bricks make them ideal for use below ground level and damp proof courses. Also often used as a capping for walls with creasing tiles to form a drip point
£959.04 per pack (Inc. VAT)