Tacky on one side only, this can also be used to overtape external joints and can also be used on floor oversealing and is covered by our BBA Certificate
Good adhesion to a wide range of substrates once primed with Technoseal
Easy and accurate to use with little waste and no mess.
The softer composition makes this product highly conformable
Remains flexible throughout its service life
High tack
Provides a waterproof seal when correctly installed
Can be used to fix many membrane and perimeter drainage channel applications
Works in conjunction with Wykamol Cavity Drain Membrane Systems
BrickFix CE1 Grout (28NT) is a two part, ready-to-mix, cementitious thixotropic grout for bonding metal components (BrickFix Helical Bars) into masonry substrates. Applied by means of a grout pointing gun.
Bostik MC250 Vitri-Flex is a fast-setting, flexible wall and floor tile adhesive in grey. It is suitable for bonding ceramic tiles, quarry tiles, porcelain, vitrified tiles, natural stone and mosaics to wall and floors.
Bostik J115 Flexible Smooth Finish Grout is a professional quality, cementitious polymer modified grout for walls and floors. It is formulated to provide narrow and wide joints.
This flexible grey grout is an easy clean off, non slump formulation and sets in 12 hours to a very hard finish. It is also mould and efflorescence resistant.
Suitable for use with a variety of tile types including ceramic, porcelain, natural stone, mosaic, marble and quarry tiles. It is suitable for joints between 2mm and 15mm for both interior and exterior use.
Ultracolor Plus grout can be used to enhance wall or floor tiled finishes both internally and externally with many added benefits such as anti-mould and water repellent features as well as being available in a wide range of colours. Suitable for use with almost all types of tile/mosaic. Not for use with metallic tiles or tiles with a soft glaze if in doubt carry out a small trial area.
BrickFix CE1 Grout (28NT) is a two part, ready-to-mix, cementitious thixotropic grout for bonding metal components (BrickFix Helical Bars) into masonry substrates. Applied by means of a grout pointing gun.
Bostik MC250 Vitri-Flex is a fast-setting, flexible wall and floor tile adhesive in grey. It is suitable for bonding ceramic tiles, quarry tiles, porcelain, vitrified tiles, natural stone and mosaics to wall and floors.
Bostik J115 Flexible Smooth Finish Grout is a professional quality, cementitious polymer modified grout for walls and floors. It is formulated to provide narrow and wide joints.
This flexible grey grout is an easy clean off, non slump formulation and sets in 12 hours to a very hard finish. It is also mould and efflorescence resistant.
Suitable for use with a variety of tile types including ceramic, porcelain, natural stone, mosaic, marble and quarry tiles. It is suitable for joints between 2mm and 15mm for both interior and exterior use.
Ultracolor Plus grout can be used to enhance wall or floor tiled finishes both internally and externally with many added benefits such as anti-mould and water repellent features as well as being available in a wide range of colours. Suitable for use with almost all types of tile/mosaic. Not for use with metallic tiles or tiles with a soft glaze if in doubt carry out a small trial area.