When installing a vertical flue to come out the roof, keeping the elements out of any gaps or cracks should be a top priority. Water penetration should be a major concern, and dealt with accordingly using the Worcester Pitched Flashing kit, ensuring that no water can get through the roof.
Designed for use with the Worcester Greenstar Boiler Range, the Worcester Condensfit II Vertical Flue provides a quick and easy solution to expelling flue gases from a central heating system. Designed to go vertically, it is best installed outside of the property once the flue has pipes have been fed outside, or through a flat or pitched roof. The design is quick and easy to install, with a simple push-fit connection and the anti-corrosive material means the system will last the life of the boiler.
This standard horizontal flue kit for Glow-worm boilers measures 755mm from the centre of the 90 degree bend to the start of the terminal and allows the safe disposal of gases created during the combustion process. Efficient disposal of flue gases are necessary to maintain your central heating system, as the disposed acidic gases could cause corrosion and break down of the system. Quick and easy to install, all fixings are included, for a straightforward installation process. As well as the flue pipe itself, the kit contains sealing tape, flue securing screws and a clamping band.
From Worcester, their 45 Degree Flue Bend is created with Greenstar Condensing boilers in mind. This 45 degree elbow bend can be used to manoeuvre a flue run around obstacles or to create a raised horizontal flue run, used in areas where space is limited. Condensate can produced acidic residue and therefore needs to be suitably disposed of, helping to maintain the efficiency of the system.
When installing a vertical flue to come out the roof, keeping the elements out of any gaps or cracks should be a top priority. Water penetration should be a major concern, and dealt with accordingly using the Worcester Pitched Flashing kit, ensuring that no water can get through the roof.
Designed for use with the Worcester Greenstar Boiler Range, the Worcester Condensfit II Vertical Flue provides a quick and easy solution to expelling flue gases from a central heating system. Designed to go vertically, it is best installed outside of the property once the flue has pipes have been fed outside, or through a flat or pitched roof. The design is quick and easy to install, with a simple push-fit connection and the anti-corrosive material means the system will last the life of the boiler.
This standard horizontal flue kit for Glow-worm boilers measures 755mm from the centre of the 90 degree bend to the start of the terminal and allows the safe disposal of gases created during the combustion process. Efficient disposal of flue gases are necessary to maintain your central heating system, as the disposed acidic gases could cause corrosion and break down of the system. Quick and easy to install, all fixings are included, for a straightforward installation process. As well as the flue pipe itself, the kit contains sealing tape, flue securing screws and a clamping band.
From Worcester, their 45 Degree Flue Bend is created with Greenstar Condensing boilers in mind. This 45 degree elbow bend can be used to manoeuvre a flue run around obstacles or to create a raised horizontal flue run, used in areas where space is limited. Condensate can produced acidic residue and therefore needs to be suitably disposed of, helping to maintain the efficiency of the system.