H+HÕs Celcon Blocks High Strength Grade (7.3N/mm2 Ð identified with a black stripe on the block) is ideal where higher compressive strengths are required such as in the foundations and lower storeys of three storey buildings, piers under high vertical loads and in multi-storey buildings.
This highly efficient block (thermal conductivity of just 0.11 W/mK) is sufficiently loadbearing for two storey buildings and can be used below DPC. Identified by the distinctive painted blue line, Celcon Solar Grade has a compressive strength of 2.9N/mm2 and is principally used where enhanced thermal performance is required.
Celcon Block Standard Grade is BBA certified and has a compressive strength of 3.6N/mm2. Its all-round performance allows a 100mm Standard Grade Celcon Block to be used consistently throughout a build, eliminating on-site confusion
The GTV-CS Castellated In-Line Tile Vent is designed for three main purposes: Roof void ventilation; Mechanical extraction; Soil ventilation, all through a castellated roof covering. The in-line profile design of this vent tile makes it almost invisible when installed at either high or low level, with no unsightly hoods or external ducting on show from the exterior to maintain an unbroken appearance to the roofline.
H+HÕs Celcon Blocks High Strength Grade (7.3N/mm2 Ð identified with a black stripe on the block) is ideal where higher compressive strengths are required such as in the foundations and lower storeys of three storey buildings, piers under high vertical loads and in multi-storey buildings.
This highly efficient block (thermal conductivity of just 0.11 W/mK) is sufficiently loadbearing for two storey buildings and can be used below DPC. Identified by the distinctive painted blue line, Celcon Solar Grade has a compressive strength of 2.9N/mm2 and is principally used where enhanced thermal performance is required.
Celcon Block Standard Grade is BBA certified and has a compressive strength of 3.6N/mm2. Its all-round performance allows a 100mm Standard Grade Celcon Block to be used consistently throughout a build, eliminating on-site confusion
The GTV-CS Castellated In-Line Tile Vent is designed for three main purposes: Roof void ventilation; Mechanical extraction; Soil ventilation, all through a castellated roof covering. The in-line profile design of this vent tile makes it almost invisible when installed at either high or low level, with no unsightly hoods or external ducting on show from the exterior to maintain an unbroken appearance to the roofline.