Ascot scroll patterned metal decking or garden fence infill panel, designed for installation between upper and lower timber frames (frame not included). Ideal for around the decking. Each panel measures 770mm high x 280mm wide, supplied in packs of 2 (560mm run). Made of solid, electro-galvanised steel with black powder coating for rust resistance. Features 16mm x 6mm flat top and base rails with pre-drilled screw holes (screws not included). Infill bars are 10mm in diameter; scrollwork measures 10mm x 3mm.
Height
70 mm
Length
770 mm
Width
280 mm
Weight
7 kg
Material
Steel
Colour
Black
Finish
Electro galvanised, rust resistance and powder coated
Don't let your hard work rot from the inside out.
When you cut, drill, or notch pressure-treated timber, you break the chemical seal and expose the untreated core to the elements. Without protection, these exposed "wounds" become the entry point for water ingress, fungi, and decay.
ESP Timber Brown End Seal is the essential solution for maintaining the structural integrity of your wood projects. This easy-to-apply, deep-penetrating preservative re-seals vulnerable end grains, restoring the protective envelope of your timber to UC2, UC3, and UC4 standards.
Size
1 L
Interior or Exterior Use
Exterior
Suitable for
All cut ends of pressure treated timbers, decking boards & joists, fence posts, top rails, gravel boards
Colour
Green
Drying Time
Touch dry within 2 hours depending on drying conditions and humidity
Coverage
5m2
Application Method
Brush
VOC Level
Low 0.3% - 7.99%
Base
Water-Based
Finish
Translucent that allows the natural grain to remain
visible
Ronseal Trade Fencing Stain adds colour and weather protection to sheds and fences in just one coat. It has increased wax for superior water repellency and UV protection for long lasting colour.
Ensure wood is clean and dry prior to application. To apply with a brush, stir the product well before and during use and load the brush generously. Apply a thick even coat, ensuring the colour is uniform; take care not to spread the product too far. To spray on, position the sprayer nozzle approximately 23cm (9 inches) away from the timber. Keep the nozzle a constant distance away from the timber and spray horizontally across the full width of the panel.
Size
5 L
Interior or Exterior Use
Exterior
Suitable for
Suitable for adding colour and weather protection to sheds and fences in just one coat.
Wavy metal decking or garden fence infill panel, fix between upper and lower timber frames (not included). Ideal for around decking. Each panel: 770mm x 280mm; pack of 2 (560mm run). Solid galvanised steel, powder-coated greyish silver. Features 16mm x 6mm flat top and base rails with pre-drilled screw holes (screws not included). Infill bars: 10mm diameter.
Ascot scroll patterned metal decking or garden fence infill panel, designed for installation between upper and lower timber frames (frame not included). Ideal for around the decking. Each panel measures 770mm high x 280mm wide, supplied in packs of 2 (560mm run). Made of solid, electro-galvanised steel with black powder coating for rust resistance. Features 16mm x 6mm flat top and base rails with pre-drilled screw holes (screws not included). Infill bars are 10mm in diameter; scrollwork measures 10mm x 3mm.
Don't let your hard work rot from the inside out.
When you cut, drill, or notch pressure-treated timber, you break the chemical seal and expose the untreated core to the elements. Without protection, these exposed "wounds" become the entry point for water ingress, fungi, and decay.
ESP Timber Brown End Seal is the essential solution for maintaining the structural integrity of your wood projects. This easy-to-apply, deep-penetrating preservative re-seals vulnerable end grains, restoring the protective envelope of your timber to UC2, UC3, and UC4 standards.
Ronseal Trade Fencing Stain adds colour and weather protection to sheds and fences in just one coat. It has increased wax for superior water repellency and UV protection for long lasting colour.
Ensure wood is clean and dry prior to application. To apply with a brush, stir the product well before and during use and load the brush generously. Apply a thick even coat, ensuring the colour is uniform; take care not to spread the product too far. To spray on, position the sprayer nozzle approximately 23cm (9 inches) away from the timber. Keep the nozzle a constant distance away from the timber and spray horizontally across the full width of the panel.
Wavy metal decking or garden fence infill panel, fix between upper and lower timber frames (not included). Ideal for around decking. Each panel: 770mm x 280mm; pack of 2 (560mm run). Solid galvanised steel, powder-coated greyish silver. Features 16mm x 6mm flat top and base rails with pre-drilled screw holes (screws not included). Infill bars: 10mm diameter.