Top coat has thixotropic properties and will resist draining away even on inclined surfaces
Suitable for a variety of applications such as roofing and garden ponds
Manufactured to colour RAL7045. If using more that one tin check colour and mix together if necessary before use
This top coat is supplied pre accelerated and is activated with the addition of MEKP catalyst at 1% to 4% by volume. Pot life at 20degC. using 2% catalyst is approximately 20 minutes. More catalyst decreases working time
Sika®-1 Waterproofer is an aqueous solution containing complex colloidal silicates. In the presence of water these swell and block the capillaries and pores in the applied sand/cement renders, screeds and mortar to provide an effective barrier against the transmission of liquid water.
Sika Damp-proofing Slurry is a ready to use (just add water), high quality, thin layer waterproof slurry coating, based on special cements and admixtures to provide a water and damp proof finish.
Sika Wintermix Admixture is an air entraining, chloride free, liquid admixture for mortar and concrete which also acts as an accelerator for work in sub - zero temperatures, with increased frost resistance during setting. Sika Wintermix improves workability, even in cold weather as well as freeze/thaw resistance in bricklaying mortars, thus eliminating the need for a separate frost proofer. Sika Wintermix can be used as an air entraining, water reducing, admixture and accelerator/frost proofer for brick and block laying mortar, render (internal and external) and concrete Sika Wintermix is also suitable for load bearing brickwork, block laying, external and internal rendering, pointing/repointing brickwork and floor screeds. Due to the embedded metal, Sika Wintermix is non-corrosive to embedded metal and can also replace Lime in the mix, reducing the possibility of lime bloom and efflorescence. Sika Wintermix also benefits from reduced shrinkage, with in turn reduces cracking and crazing.
Sovereign Hey’di K11 is a salt-resistant cementitious tanking compound for the protection of structures against water from the ground, and which may be subject to hydrostatic pressure. It can be used on the external side of buildings below ground level where positive pressure exists or on the internal (negative) side without the need to build supporting walls. The Sovereign Hey’di tanking system is fully covered by the British Board of Agreement Certificate 91/2608. Once cured, K11 is impervious to water, and the system has been independently tested to withstand greater than 10 bars of pressure on the negative side (over 100 metres head of water) with a coating thickness of 4 mm in two coats.
Size
25 kg
Material
Blend of Cement, Portland Cement, Additives, Flue Dust
Colour
Grey
Usage
Salt-resistant cementitious tanking compound for protecting structures from water ingress and hydrostatic pressure. Suitable for internal (negative) and external (positive) applications, waterproofing basements, cellars, water tanks, bunds, pools, and salt-contaminated walls
Coverage
Varies Depending on Subrstate and Application Method
Sika®-1 Waterproofer is an aqueous solution containing complex colloidal silicates. In the presence of water these swell and block the capillaries and pores in the applied sand/cement renders, screeds and mortar to provide an effective barrier against the transmission of liquid water.
Sika Damp-proofing Slurry is a ready to use (just add water), high quality, thin layer waterproof slurry coating, based on special cements and admixtures to provide a water and damp proof finish.
Sika Wintermix Admixture is an air entraining, chloride free, liquid admixture for mortar and concrete which also acts as an accelerator for work in sub - zero temperatures, with increased frost resistance during setting. Sika Wintermix improves workability, even in cold weather as well as freeze/thaw resistance in bricklaying mortars, thus eliminating the need for a separate frost proofer. Sika Wintermix can be used as an air entraining, water reducing, admixture and accelerator/frost proofer for brick and block laying mortar, render (internal and external) and concrete Sika Wintermix is also suitable for load bearing brickwork, block laying, external and internal rendering, pointing/repointing brickwork and floor screeds. Due to the embedded metal, Sika Wintermix is non-corrosive to embedded metal and can also replace Lime in the mix, reducing the possibility of lime bloom and efflorescence. Sika Wintermix also benefits from reduced shrinkage, with in turn reduces cracking and crazing.
Sovereign Hey’di K11 is a salt-resistant cementitious tanking compound for the protection of structures against water from the ground, and which may be subject to hydrostatic pressure. It can be used on the external side of buildings below ground level where positive pressure exists or on the internal (negative) side without the need to build supporting walls. The Sovereign Hey’di tanking system is fully covered by the British Board of Agreement Certificate 91/2608. Once cured, K11 is impervious to water, and the system has been independently tested to withstand greater than 10 bars of pressure on the negative side (over 100 metres head of water) with a coating thickness of 4 mm in two coats.