Safe-D Fire Rated Cable Clips are fully certified to satisfy legislative requirements to secure all surface cables in escape routes in residential and non-residential buildings (Amendment 3 to the 17th Edition, BS7671:2015, Wiring Regulations). When used with appropriate fixings Safe-D Clips can securely hold bundles of cables on a surface at 970ºC for at least 2 hours. Manufactured in the UK using specific high-temperature pliable steel produced to BS EN standards with full traceability. Safe-D Clips have a passivated finish to protect against corrosive elements and minimise the risk of rust failure. Safe-D Clips feature 20mm tab widths; while the specific pliable-gauge and smooth/rounded corners (as required by design-code BS7671 s 522.8.11) protect both cables and installers; unique features which make Safe-D Clips the quickest and easiest to install. Safe-D50 Clips are suitable for use with standard trunking Size 6 (50x25mm), Size 7 (50x32mm), or Size 8 (50x50mm).
BASEC approved low smoke zero halogen twin & Earth domestic wiring cable. Can be installed in fixed installations in dry or damp premises clipped to surface, on trays or in free air where mechanical damage would not be an issue. Suitable for laying in conduit or trunking where mechanical protection is required. For use where fire, smoke emission and toxic fumes create a potential threat to life and equipment.
Speedfit Conduit Pipe which provides a cover and blanket for when Speedfit PEX or Polybutylene pipe are installed in concrete or masonry, and should be removable as stated in the Water Regulations.
Safe-D Fire Rated Cable Clips are fully certified to satisfy legislative requirements to secure all surface cables in escape routes in residential and non-residential buildings (Amendment 3 to the 17th Edition, BS7671:2015, Wiring Regulations). When used with appropriate fixings Safe-D Clips can securely hold bundles of cables on a surface at 970ºC for at least 2 hours. Manufactured in the UK using specific high-temperature pliable steel produced to BS EN standards with full traceability. Safe-D Clips have a passivated finish to protect against corrosive elements and minimise the risk of rust failure. Safe-D Clips feature 20mm tab widths; while the specific pliable-gauge and smooth/rounded corners (as required by design-code BS7671 s 522.8.11) protect both cables and installers; unique features which make Safe-D Clips the quickest and easiest to install. Safe-D50 Clips are suitable for use with standard trunking Size 6 (50x25mm), Size 7 (50x32mm), or Size 8 (50x50mm).
BASEC approved low smoke zero halogen twin & Earth domestic wiring cable. Can be installed in fixed installations in dry or damp premises clipped to surface, on trays or in free air where mechanical damage would not be an issue. Suitable for laying in conduit or trunking where mechanical protection is required. For use where fire, smoke emission and toxic fumes create a potential threat to life and equipment.
Speedfit Conduit Pipe which provides a cover and blanket for when Speedfit PEX or Polybutylene pipe are installed in concrete or masonry, and should be removable as stated in the Water Regulations.