Made with a water-repellent additive to resist moisture ingress.
Holds an Agrément certificate by the BBA for use in all exposure zones, including those in very severe areas.
Engineered to adapt to any slight imperfections in the substrate and knit together, eliminating any air gaps and preserving thermal performance for the lifetime of the building.
Friction fits between wall ties, so there is no need for ancillary products, such as retaining discs or jointing tape.
Full-fill solution that doesn't require cavity barriers.
Holds a CCPI Verification Mark (certificate number 000600006/0426) for the entire product set
A universal insulation board for use in pitched roofs, walls and floors. Comprises a fibre free rigid PIR insulation core faced with an aluminium foil composite on both sides.
Length
2400 mm
Thickness
75 mm
Width
1200 mm
Material
PIR
Usage
Can be used to upgrade insulation on most internal and external walls
Acoustic Intumescent Sealant is a high specification, one part water based acrylic sealant. Acoustic Intumescent Sealant is designed for use in the installation of ROCKWOOL Ablative Coated Batt, sealing linear joints and some individual service penetrations passing through various substrates.
Size
310 ml
Container Type
Cartridge
Certifications Met
CoCoP: 2531-CPR-CXO10266, ETA - 20/1129, ETA - 20/1130, UL-EU: 01203-CPR
Actis Hybris Panels are 1.2m in length, 114.5 cm in width, and have a thickness of 12.5cm, providing a total coverage area of 2.74m2.
Made of shaped polyethylene foam bonded to aluminium-coated films, their honeycomb structure with low-emissivity cavities provides high thermal efficiency. Heat capacity is 2300JK/kgK. Suitable for timber frames, masonry, pitched roofs, ceilings, and floors. Lightweight with tensile strength over 45kPa, tested to EN 1608 and EN 12310-1, durability maintained after ageing.
TLX Multifoil Pitched Roof Insulation Gold: 10 m long, 1.2 m wide, 3.3 cm thick, covering 12 m2. A dual-function breather membrane that vapour vents and insulates like PIR, enhancing thermal performance without condensation or roof height changes. Suitable for refurbishments and new builds, preventing condensation and improving insulation. SD intelligent technology increases ventilation with moisture, removing the need for a vapour barrier. Lightweight, easy to install, with BBA certification and LABC approval. Ideal for historic, public, and social housing, barn conversions, new builds, and extensions.
A universal insulation board for use in pitched roofs, walls and floors. Comprises a fibre free rigid PIR insulation core faced with an aluminium foil composite on both sides.
Acoustic Intumescent Sealant is a high specification, one part water based acrylic sealant. Acoustic Intumescent Sealant is designed for use in the installation of ROCKWOOL Ablative Coated Batt, sealing linear joints and some individual service penetrations passing through various substrates.
Actis Hybris Panels are 1.2m in length, 114.5 cm in width, and have a thickness of 12.5cm, providing a total coverage area of 2.74m2.
Made of shaped polyethylene foam bonded to aluminium-coated films, their honeycomb structure with low-emissivity cavities provides high thermal efficiency. Heat capacity is 2300JK/kgK. Suitable for timber frames, masonry, pitched roofs, ceilings, and floors. Lightweight with tensile strength over 45kPa, tested to EN 1608 and EN 12310-1, durability maintained after ageing.
TLX Multifoil Pitched Roof Insulation Gold: 10 m long, 1.2 m wide, 3.3 cm thick, covering 12 m2. A dual-function breather membrane that vapour vents and insulates like PIR, enhancing thermal performance without condensation or roof height changes. Suitable for refurbishments and new builds, preventing condensation and improving insulation. SD intelligent technology increases ventilation with moisture, removing the need for a vapour barrier. Lightweight, easy to install, with BBA certification and LABC approval. Ideal for historic, public, and social housing, barn conversions, new builds, and extensions.