Delivery address
Collection branch
Ideas & Advice
VAT
EX
INC
Knauf Insulation OmniFit® Insulation Roll 3400mm x 1200mm x 200mm
Hover Over to Zoom In
Overview
- Multi-purpose product that can be used to insulate a wide range of applications, reducing the need to purchase and handle multiple products
- Partially perforated rolls for use in either timber or steel frame applications at 400mm or 600mm centres.
- Designed to friction fit between studs, which prevents air movement and infiltration around the edges, minimising heat loss
- Compression packed with more product on a pallet than alternative rock mineral wool products
- Manufactured from mineral wool which provides the best levels of sound absorption and reduction compared to other mainstream insulants
Technical specification
Weight
9.792 kg
Length
3400 mm
Thickness
200 mm
Width
450 mm
Material
Glass Mineral Wool
Usage
Multipurpose - Pitched Roofs - Ceiling Level, Internal Walls, Internal Floors, Separating Floors - Timber, Suspended Timber Ground Floors
Coverage
4.08 m2
Thermal Conductivity
0.04 W/mK
Pack Quantity
1
Type
Insulation Rolls
Range Description
Multi-Purpose Insulation Slab
Brand Name
Knauf Insulation
Manufacturer Model No
474293
Data sheets
Reviews
Be the first to review this product.
120mm x 2400mm x 1200mm Celotex PIR Insulation Board XR4000
Celotex XR4000 is an easy to install polyisocyanurate (PIR) insulation board with excellent thermal performance, featuring a low emissivity foil facing. Available in thicknesses from 110mm to 200mm, it can be considered for roof, wall and floor applications.
£90.70 per sheet (Inc. VAT)
Actis Hybris Panels 155mm 2 Pack 2.74m2
Is made of shaped polyethylene foams glued to aluminium coated polyethylene foils. The unique honeycomb structure composes of a large number of low emissivity cavities that ensure high thermal performance. The reflective insulation product has a heat capacity of 2300JK/kgK. The panels can be used on timber frame, masonry walls, pitched roof, ceilings, floors & suspended timber floors. The lightweight Hybris panels have a tensile strength greater than 45kPa before and after ageing in both longitudinal and transversal directions. The tensile strength is tested to EN 1608 and the tearing and nail shank resistance to EN 12310- 1 part 1.
£63.74 per pack (Inc. VAT)
Ecotherm Eco-cavity 1200 x 450 x 75mm Cavity Wall Insulation CAV75
Partial fill cavity wall PIR insulation. Fibre free rigid insulation core with aluminium foil composite to both sides. The boards are conveniently sized to co-ordinate with brick and block dimensions and allow the insertion of wall ties at the appropriate spacing.
£24.08 per sheet (Inc. VAT)
Rockwool Ablative Coated Batt 50mm x 1200mm x 600mm 0.72m2/ Pack
Rockwool Ablative Coated Batt is a specially designed insulation batt that acts as an air seal barrier whilst reinforcing fire resistance and acoustic performance of concrete floors, masonry walls and drylining systems. Its unique design means it has outstanding fire performance of up to 4 hours, whilst remaining lightweight enough to ensure easy installation. This product has been tested for its airtightness performance and requires no maintenance once installed. This comes in a pack of 1.
£35.23 each (Inc. VAT)