Warm Roof construction is a particularly effective way of insulating complex
roofs. Insulating above - or above and between - the roof timbers ensures
that the structure is kept at or near the internal environmental conditions,
reducing thermal stress and condensation risk.
Actis Hybris Panels are 1.2m in length, 114.5 cm in width, and have a thickness of 15.5cm, providing a total coverage area of 2.74m2.
Made of shaped polyethylene foam bonded to aluminium-coated films, their honeycomb structure with low-emissivity cavities provides high thermal efficiency. Heat capacity is 2300JK/kgK. Suitable for timber frames, masonry, pitched roofs, ceilings, and floors. Lightweight with tensile strength over 45kPa, tested to EN 1608 and EN 12310-1, durability maintained after ageing.
A universal insulation board for use in pitched roofs, walls and floors. Comprises a fibre free rigid PIR insulation core faced with an aluminium foil composite on both sides.
Manufacturer Model No
PR150
Brand Name
Ecotherm
Length
2400 mm
Thickness
150 mm
Width
1200 mm
Material
PIR
Usage
Can be used to upgrade insulation on most internal and external walls
Partial fill cavity wall PIR insulation. Fibre free rigid insulation core with aluminium foil composite to both sides. The boards are conveniently sized to co-ordinate with brick and block dimensions and allow the insertion of wall ties at the appropriate spacing.
Length
1200 mm
Thickness
75 mm
Width
450 mm
Material
Rigid polyisocyanurate PIR foam core with aluminium foil composite to both sides
Usage
New build and upgrading thermal performance of existing cavity walls
Warm Roof construction is a particularly effective way of insulating complex
roofs. Insulating above - or above and between - the roof timbers ensures
that the structure is kept at or near the internal environmental conditions,
reducing thermal stress and condensation risk.
Actis Hybris Panels are 1.2m in length, 114.5 cm in width, and have a thickness of 15.5cm, providing a total coverage area of 2.74m2.
Made of shaped polyethylene foam bonded to aluminium-coated films, their honeycomb structure with low-emissivity cavities provides high thermal efficiency. Heat capacity is 2300JK/kgK. Suitable for timber frames, masonry, pitched roofs, ceilings, and floors. Lightweight with tensile strength over 45kPa, tested to EN 1608 and EN 12310-1, durability maintained after ageing.
A universal insulation board for use in pitched roofs, walls and floors. Comprises a fibre free rigid PIR insulation core faced with an aluminium foil composite on both sides.
Partial fill cavity wall PIR insulation. Fibre free rigid insulation core with aluminium foil composite to both sides. The boards are conveniently sized to co-ordinate with brick and block dimensions and allow the insertion of wall ties at the appropriate spacing.