For the eradication of mould problems on walls and ceilings
Designed for minor to moderate outbreaks of mould
Designed specifically for homeowners and tenants to use
Successfully used for over 30 years by amateurs
Technical specification
Size
Kit
Suitable for
Amateur and Professional 3 stage treatment for the long term eradication of mould contamination to interior walls and ceilings
Coverage
10-12 Square metres
Interior or Exterior Use
Interior
Container Type
Plastic Bottles and Cardboard Box
Application Method
Cloth, Brush and roller
Type
Concentrates and ready to use
Certifications Met
GB Amendment Certificate RLT Bactdet 05 HSE No 8144/RLT Halophen HSE No 4081/Fungicidal Additive Approved under COPR 1986 (as amended) by the H&S Executive HSE No 6605
Biocide is a substance or product that controls or destroys harmful or unwanted organisms, such as bacteria, viruses, fungi, insects, or rodents, through a chemical or biological action, rather than physical means.
Kit contains: x1 Dryrod 50 Box x1 Dryzone System Hole Clearing Tool - x1 Dryzone System Rod Cutting Tool- x1 Dryzone Drill Bit - 12mm x 300mm - x1 Stormdry Xr Mortar - No fuss, no mess, no stress. Dryrod is the next generation of rising damp treatment developed by Safeguard Europe Ltd. The patented, BBA approved 12mm diameter DIY damp proofing rods carry a powerful water repellent material, which cures to form a powerful barrier to rising damp. Once they are inserted, the rods will start to dry out the wall by slowly diffusing water repellent deep into the damp masonry, curing to form a powerful barrier to further rising damp. Installation: Simply insert the 9" rods into a series of 12mm holes drilled into the lowest available continuous mortar course of the wall. No specialist pumps or mastic guns required. A normal hammer drill will suffice. Once installed they diffuse the active ingredient deep into the wall before it cures to form a water-repellent chemical damp course. Advantages over other methods: The most effective rising damp treatment available - Proven to work even up to 95% saturation Quick & easy to install DIY rising damp treatment - Simply drill holes & insert the damp-proofing rods to form a new chemical damp course. No mess to clean up - The active ingredient is contained within the rods so there's no chance of messy spillages that occur with other solutions for damp proofing for walls.
A radical chemical blend containing a sophisticated mixture of alkaline materials and wetting agents to attack varied types of blockages whether caused by hair, grease, fat, oils, etc.. Heavier than water the unique formula holds the active chemicals together, allowing them to sink to the source of the problem with minimum loss of activity.
Dryzone Anti-Mould Additive is a highly-effective biocidal additive liquid. It imparts paints, wallpaper pastes and tile grouts with mould-resistant properties. The special biocidal formula of the additive will resist the growth of mould in areas of persistent condensation for up to five years.
Biocide is a substance or product that controls or destroys harmful or unwanted organisms, such as bacteria, viruses, fungi, insects, or rodents, through a chemical or biological action, rather than physical means.
Kit contains: x1 Dryrod 50 Box x1 Dryzone System Hole Clearing Tool - x1 Dryzone System Rod Cutting Tool- x1 Dryzone Drill Bit - 12mm x 300mm - x1 Stormdry Xr Mortar - No fuss, no mess, no stress. Dryrod is the next generation of rising damp treatment developed by Safeguard Europe Ltd. The patented, BBA approved 12mm diameter DIY damp proofing rods carry a powerful water repellent material, which cures to form a powerful barrier to rising damp. Once they are inserted, the rods will start to dry out the wall by slowly diffusing water repellent deep into the damp masonry, curing to form a powerful barrier to further rising damp. Installation: Simply insert the 9" rods into a series of 12mm holes drilled into the lowest available continuous mortar course of the wall. No specialist pumps or mastic guns required. A normal hammer drill will suffice. Once installed they diffuse the active ingredient deep into the wall before it cures to form a water-repellent chemical damp course. Advantages over other methods: The most effective rising damp treatment available - Proven to work even up to 95% saturation Quick & easy to install DIY rising damp treatment - Simply drill holes & insert the damp-proofing rods to form a new chemical damp course. No mess to clean up - The active ingredient is contained within the rods so there's no chance of messy spillages that occur with other solutions for damp proofing for walls.
A radical chemical blend containing a sophisticated mixture of alkaline materials and wetting agents to attack varied types of blockages whether caused by hair, grease, fat, oils, etc.. Heavier than water the unique formula holds the active chemicals together, allowing them to sink to the source of the problem with minimum loss of activity.
Dryzone Anti-Mould Additive is a highly-effective biocidal additive liquid. It imparts paints, wallpaper pastes and tile grouts with mould-resistant properties. The special biocidal formula of the additive will resist the growth of mould in areas of persistent condensation for up to five years.