Full wave electronic speed control with feedback ensures the selected speed is maintained under any load for a consistent finish in all grades of timber, aluminium and plastics
Variable speed control 16,000 to 27,000 which enables the router bit to be optimised for application
Compact, light weight design that increase ease of use and user comfort
Dual LED lights increase the visibility around the router bit during operation
The DeWalt 18V XR 3 Mode Dedicated Cordless Hammer Drill Bare Unit has been constructed for heavy duty applications. The Brushless motor delivers reduced friction and better runtime which enables more power to be delivered during application. This results in less wear and an increase in longevity of the tool. The SDS+ offers high speed drilling performance up to 90 holes (10mm x 80mm) per charge using a 18V XR 5.0Ah battery (Not Included). The Rotation stop mode feature allows for light chiselling in plaster, tiles and render. Impact stop mode offers rotary only drilling in wood and metal
The DCM5713 is a 54v cordless XR FLEXVOLT split shaft grass trimmer with brushless motor, two speed settings, variable speed control, paddle switch and a patented gear drive which helps to maintain cutting speed while under load. Supplied with 7 metres of 2.0mm cutting line, the DCM5713 has a 38cm cutting swath for optimum performance and a comfortable overmoulded auxiliary handle with a protection bar for maximum grip, comfort and control.
Compact and well balanced planer with a 2mm depth of cut and a 9mm rebate capacity. 0.1mm indexed fine adjustment for accurate planing. Brushless motor for excellent efficiency and long tool life. XR switch and module protect the motor from overload and battery from deep discharge. AirLock port compatibility with dust bag or extraction. Traditional blade change with hex wrench or torx key. Includes on-board blade storage for 2 x 82mm blades and Torx key storage to minimise down time. Supplied with 82mm reversible TCT blades, guide fence and alignment guide. Compatible with DeWalt XR Li-ion slide pack batteries. (Please note battery is not included).
The DeWalt DS280 Toughsystem® Tote with Handle has been constructed from thick reinforced structural foam plastic for added durability and enhanced longevity. The open tote design allows full visibility and easy quick access to your tools, small parts and accessories. The Toughsystem® modular storage solution allows multiple Toughsystem® units to be stacked together using the side latches, allowing for customisation of storage needs depending on what is required for a jobsite. All units have an IP65 rating against water and dust, ensuring the safe and dry storage of tools during transportation and onsite.
The DeWalt 18V XR 3 Mode Dedicated Cordless Hammer Drill Bare Unit has been constructed for heavy duty applications. The Brushless motor delivers reduced friction and better runtime which enables more power to be delivered during application. This results in less wear and an increase in longevity of the tool. The SDS+ offers high speed drilling performance up to 90 holes (10mm x 80mm) per charge using a 18V XR 5.0Ah battery (Not Included). The Rotation stop mode feature allows for light chiselling in plaster, tiles and render. Impact stop mode offers rotary only drilling in wood and metal
The DCM5713 is a 54v cordless XR FLEXVOLT split shaft grass trimmer with brushless motor, two speed settings, variable speed control, paddle switch and a patented gear drive which helps to maintain cutting speed while under load. Supplied with 7 metres of 2.0mm cutting line, the DCM5713 has a 38cm cutting swath for optimum performance and a comfortable overmoulded auxiliary handle with a protection bar for maximum grip, comfort and control.
Compact and well balanced planer with a 2mm depth of cut and a 9mm rebate capacity. 0.1mm indexed fine adjustment for accurate planing. Brushless motor for excellent efficiency and long tool life. XR switch and module protect the motor from overload and battery from deep discharge. AirLock port compatibility with dust bag or extraction. Traditional blade change with hex wrench or torx key. Includes on-board blade storage for 2 x 82mm blades and Torx key storage to minimise down time. Supplied with 82mm reversible TCT blades, guide fence and alignment guide. Compatible with DeWalt XR Li-ion slide pack batteries. (Please note battery is not included).
The DeWalt DS280 Toughsystem® Tote with Handle has been constructed from thick reinforced structural foam plastic for added durability and enhanced longevity. The open tote design allows full visibility and easy quick access to your tools, small parts and accessories. The Toughsystem® modular storage solution allows multiple Toughsystem® units to be stacked together using the side latches, allowing for customisation of storage needs depending on what is required for a jobsite. All units have an IP65 rating against water and dust, ensuring the safe and dry storage of tools during transportation and onsite.