Designed for moderate to severe outbreaks of mould in 3 or 4 rooms
For use by homeowners or contractors
Compact treatment for extensive mould contamination
Technical specification
Size
Pack
Suitable for
Amateur and Professional 4 part treatment for the long term eradication of mould contamination to interior walls, ceilings and Soft Furnishings
Coverage
45-50 Square metres
Interior or Exterior Use
Interior
Container Type
Plastic Bottle and Cardboard Box
Application Method
Cloth, Brush and roller
Type
Concentrates and ready to use
Pack Quantity
7 Mould Treatment Products plus gloves and cloth
Certifications Met
GB Amendment Certificate RLT Bactdet 05 HSE No 8144/RLT Halophen HSE No 4081/Clearmould Spray Approved under COPR 1986 )as amended) by the H&S Executive HSE No 4824/Fungicidal Additive Approved under COPR 1986 (as amended) by the H&S Executive HSE No 6605
Sika®-2 Water Plug is a ready to use very rapid setting leak stopping liquid which is mixed with ordinary portland cement to produce a paste for immediate leak sealing against high water pressure infiltration.
Pavetuf UPVC and Fascia Cleaner is a high performance, long lasting advanced formula which removes algae, moss, fungus, leaf staining and general soiling from white and coloured exterior UPVC. It is fast acting and easy to apply, reveing and brightening exterior UPVC. Containing no colvents, acids or caustic soda means it will not damage the treated surface.
A radical chemical blend containing a sophisticated mixture of alkaline materials and wetting agents to attack varied types of blockages whether caused by hair, grease, fat, oils, etc.. Heavier than water the unique formula holds the active chemicals together, allowing them to sink to the source of the problem with minimum loss of activity.
Everything you need to effectively eliminate black mould, clean staining and sanitise treated areas for long-lasting protection. Designed for domestic use in high-humidity areas like bathrooms, kitchens and utility rooms, the kit includes three powerful products for a complete three-stage process. Dryzone Mould Eliminator delivers fast-acting mould removal with visible results in minutes. Dryzone Mould Remover Gel targets stubborn surface stains in hard-to-reach places like silicone, behind fittings and around seals with a thick formula that clings in place for deep action. Apply Dryzone 100 Mould Sanitiser to neutralise invisible spores and bacteria, helping prevent recurrence and leaving the surface hygienically clean. This easy-to-use kit is suitable for use on tiles, painted walls, sealants, uPVC and most non-porous building surfaces.
Sika®-2 Water Plug is a ready to use very rapid setting leak stopping liquid which is mixed with ordinary portland cement to produce a paste for immediate leak sealing against high water pressure infiltration.
Pavetuf UPVC and Fascia Cleaner is a high performance, long lasting advanced formula which removes algae, moss, fungus, leaf staining and general soiling from white and coloured exterior UPVC. It is fast acting and easy to apply, reveing and brightening exterior UPVC. Containing no colvents, acids or caustic soda means it will not damage the treated surface.
A radical chemical blend containing a sophisticated mixture of alkaline materials and wetting agents to attack varied types of blockages whether caused by hair, grease, fat, oils, etc.. Heavier than water the unique formula holds the active chemicals together, allowing them to sink to the source of the problem with minimum loss of activity.
Everything you need to effectively eliminate black mould, clean staining and sanitise treated areas for long-lasting protection. Designed for domestic use in high-humidity areas like bathrooms, kitchens and utility rooms, the kit includes three powerful products for a complete three-stage process. Dryzone Mould Eliminator delivers fast-acting mould removal with visible results in minutes. Dryzone Mould Remover Gel targets stubborn surface stains in hard-to-reach places like silicone, behind fittings and around seals with a thick formula that clings in place for deep action. Apply Dryzone 100 Mould Sanitiser to neutralise invisible spores and bacteria, helping prevent recurrence and leaving the surface hygienically clean. This easy-to-use kit is suitable for use on tiles, painted walls, sealants, uPVC and most non-porous building surfaces.