Softwood DX Vertical Grained Clear Pine Internal Door 1981mm x 610mm x 35mm
619414
Hover Over to Zoom In
Overview
Does not include door furniture. Door furniture sold separately.
Classic 1930's style design with internal mouldings
An engineered door, finished with vertically cut Pine Veneered producing an attractive appearance in clear Pine
Can be trimmed up to a maximum of 6mm on any edge - any reduction should be removed evenly from each edge
Recommended that 3 hinges are used when fitting this door. Recessed furniture and locks must not be placed within 76mm (3") of any rail/side joint as this will weaken the door
Supplied unfinished, seal and finish using at least 3 coats of a water based varnish, paint or woodstain
This door is NOT suitable for polishing, waxing or treatment with any type of oil