Suitable for use with all water systems, including gravity fed systems, this water saving eco model in the Dene bar mixer range has a factory fitted flow limiter for a maximum flow rate of 6 l/min, conforming to the most water efficient banding as per the Bathroom Manufacturer Association (BMA) water label scheme.
Speedfit push-fit plastic fitting for the connection of plastic and cooper pipe. Simply push the fitting onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fitting methods. Note; with all plastic pipes the relevant manufacturer’s pipe insert is required. Designed, manufactured and assembled in the UK by John Guest Speedfit.
Whether you’re out to add a cool feature to your bathroom or find inspiration for a complete bathroom renovation, Aspirante puts cutting-edge design at the heart of your bathroom.
Depth
75 mm
Length
300 mm
Width
200 mm
Hose Length
1500 mm
Pipe Connector Size
15 mm male
Flow Rate
1 bar @ 8 l/min
Maximum Operating Pressure
1 bar
Number of Modes
3
Temperature Control
Stabilised
Cable Entry
Left Hand Side - Top, Bottom, Back
Pipe Entry
Left Hand Side - Top/Bottom/Back : Right Hand Side - Bottom/Back
Suitable for use with all water systems, including gravity fed systems, this water saving eco model in the Dene bar mixer range has a factory fitted flow limiter for a maximum flow rate of 6 l/min, conforming to the most water efficient banding as per the Bathroom Manufacturer Association (BMA) water label scheme.
Speedfit push-fit plastic fitting for the connection of plastic and cooper pipe. Simply push the fitting onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fitting methods. Note; with all plastic pipes the relevant manufacturer’s pipe insert is required. Designed, manufactured and assembled in the UK by John Guest Speedfit.
Whether you’re out to add a cool feature to your bathroom or find inspiration for a complete bathroom renovation, Aspirante puts cutting-edge design at the heart of your bathroom.