Hover Over to Zoom In
Overview
Compression Tank Connector 15mm fittings can used on a wide range of applications including central heating and hot & cold water supplies.
- Fast and simple installation
- Heat free, no soldering needed
- Joint can be dismantled and re-built
- Joints can be made on wet pipework
- Standard 5 Year Manufacturing Guarantee
- Manufactured to EN1254 Specification
- WRAS approved where required
- Pressure tested to 16 bar
- UK manufacture
Technical specification
Suitable for
Water
Diameter
15 mm
Connection Type
Compression
Material
Brass
Years Guaranteed
5
Type
Compression Sundries
Made To Order
N
Manufacturer Model No
P9211
Brand Name
Travis Perkins
Reviews
Be the first to review this product.
22mm Pipe Connector 3/4inch x 30cm
This hose is ideal for the connection of taps. To isolate the appliance simply turn the handle on the valve a 1/4 turn. To make a connection simply push the fitting fully on to the pipe and screw the nut onto the thread of the appliance.
£7.90 each (Inc. VAT)
End Feed Straight Tap Connector 15mm x 19mm
Create your own flow system by using the endfeed range to build a strong and leak free system.
£3.83 each (Inc. VAT)
HEP2O HD1/15W Straight Connector 15mm
Hep2O is packed with unique features that make fitting easier quicker and more secure for installers. It is the only system with joint recognition and secure demounting and comes with a 50 year guarantee.
£2.45 each (Inc. VAT)
JG Speedfit female tap connector 15mm x 1/2inch
Speedfit push-fit fitting for the connection of plastic and copper pipe to a male thread appliance. The female coupler is ideal for the connection of taps and toilets. In comparison to other installation methods available no tools are required with this hand-tightened connection. Simply push the fitting fully onto the pipe and hand turn onto the thread. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods. Note: with all plastic pipes the relevant manufacturer’s pipe insert is required. Designed, manufactured and assembled in the UK by John Guest Speedfit.
£1.87 each (Inc. VAT)