Just what I needed for my chimney breast ready for log burner to be installed.Crosby branch (L23) always seemed well stocked and staff are very helpful
2 years ago
John
Type of purchase: Trade
Yes, I would recommend to a friend
4
0
5
I would buy this wood again
Does just what it says on the tin
2 years ago
Simon
Type of purchase: DIY
Yes, I would recommend to a friend
2
0
5
I have always had excellent service
Product wasn't needed so returned.very helpful young man took the item out of my car
H+HÕs Celcon Blocks High Strength Grade (7.3N/mm2 Ð identified with a black stripe on the block) is ideal where higher compressive strengths are required such as in the foundations and lower storeys of three storey buildings, piers under high vertical loads and in multi-storey buildings.
This highly efficient block (thermal conductivity of just 0.11 W/mK) is sufficiently loadbearing for two storey buildings and can be used below DPC. Identified by the distinctive painted blue line, Celcon Solar Grade has a compressive strength of 2.9N/mm2 and is principally used where enhanced thermal performance is required.
Celcon Block Standard Grade is BBA certified and has a compressive strength of 3.6N/mm2. Its all-round performance allows a 100mm Standard Grade Celcon Block to be used consistently throughout a build, eliminating on-site confusion
This solid, dense concrete block from Aggregate Industries is suitable for cavity or solid wall constructions, internal load bearing walls and beam and block flooring. Water resistant with sound insulation properties.
H+HÕs Celcon Blocks High Strength Grade (7.3N/mm2 Ð identified with a black stripe on the block) is ideal where higher compressive strengths are required such as in the foundations and lower storeys of three storey buildings, piers under high vertical loads and in multi-storey buildings.
This highly efficient block (thermal conductivity of just 0.11 W/mK) is sufficiently loadbearing for two storey buildings and can be used below DPC. Identified by the distinctive painted blue line, Celcon Solar Grade has a compressive strength of 2.9N/mm2 and is principally used where enhanced thermal performance is required.
Celcon Block Standard Grade is BBA certified and has a compressive strength of 3.6N/mm2. Its all-round performance allows a 100mm Standard Grade Celcon Block to be used consistently throughout a build, eliminating on-site confusion
This solid, dense concrete block from Aggregate Industries is suitable for cavity or solid wall constructions, internal load bearing walls and beam and block flooring. Water resistant with sound insulation properties.