Free Click & Collect
Within One Hour
Delivery address
Collection branch
Ideas & Advice
VAT
EX
INC
IKO Hyload Original Damp Proof Course 150mm x 20m
Hover Over to Zoom In
Frequently bought together
Overview
- Good flexibility at low temperatures
- Excellent performance under high compressive loads
- Market leading mortar adhesion
- Tough and durable
- Suitable for damp proofing and cavity trays in all solid/cavity wall applications (brick, block, stonework and concrete)
- Durable – the DPC material will remain effective for the design life of the building, under normal working conditions
- Contains over 70% recycled materials
- Available in a wide range of size
Technical specification
Size
150 mm
Length
20 m
Width
150 mm
Weight
5.55 kg
Material
Polymer
Colour
Black
Coverage
3m2
Certifications Met
BBA Certificate 95/3133
Type
Damp Proof Course
Manufacturer Model No
31515000
Brand Name
Hyload
Reviews
Be the first to review this product.
Safeguard Drybase Plaster Membrane 2m X 20m
Drybase Plaster Mesh Membrane LP is produced using high-quality Polypropylene material and provides a barrier to moisture, salts and vapour. It is a slimline membrane with 2.5mm studs on the rear that enables the management of moisture without significantly reducing room space. A plastic mesh is welded to the front surface of the membrane, allowing it to accept plaster coats via standard trowel application or as a base for dot and dab plasterboard application.
£488.51 each (Inc. VAT)
Visqueen Eco Blend Tps 4m x 50m 125mu
Visqueen Building Products ECO TPS range is a blown film of extruded low-density polyethylene. Visqueen ECO TPS range is a high quality Temporary Protective Sheeting (TPS) manufactured from 100% Recycled LDPE.
£789.24 each (Inc. VAT)
Safeguard Drybase Fleece Overseal Tape 100MM X 20M
Fleece backed 100 mm waterproof butyl tape gives a well-bonded seal to the mesh face of Drybase. Plaster Membrane. The fleece backing to this tape also accepts a plaster coat finish as well as plaster adhesive where a dot and dab plasterboard system is preferred.
£40.24 each (Inc. VAT)
Safeguard Dryrod Damp Proofing Rods Pack of 50
Dryrod is the next generation of rising damp treatment developed by Safeguard Europe Ltd. The patented, BBA approved 12mm diameter DIY damp proofing rods carry a powerful water repellent material, which cures to form a powerful barrier to rising damp. Once they are inserted, the rods will start to dry out the wall by slowly diffusing water repellent deep into the damp masonry, curing to form a powerful barrier to further rising damp. Installation: Simply insert the 9" rods into a series of 12mm holes drilled into the lowest available continuous mortar course of the wall. No specialist pumps or mastic guns required. A normal hammer drill will suffice. Once installed they diffuse the active ingredient deep into the wall before it cures to form a water-repellent chemical damp course. Advantages over other methods: The most effective rising damp treatment available - Proven to work even up to 95% saturation Quick & easy to install DIY rising damp treatment - Simply drill holes & insert the damp-proofing rods to form a new chemical damp course. No mess to clean up - The active ingredient is contained within the rods so there's no chance of messy spillages that occur with other solutions for damp proofing for walls.
£106.87 per box (Inc. VAT)