Waterproof butyl 75mm overseal tape for sealing over membrane joints, butt joints and overlaps to provide additional protection. Drybase Overseal Tapes are utilised for sealing over joints between Drybase cavity drain membranes and other materials. They can also be applied for sealing around services and challenging details.
Drybase Plaster Mesh Membrane LP is produced using high-quality Polypropylene material and provides a barrier to moisture, salts and vapour. It is a slimline membrane with 2.5mm studs on the rear that enables the management of moisture without significantly reducing room space. A plastic mesh is welded to the front surface of the membrane, allowing it to accept plaster coats via standard trowel application or as a base for dot and dab plasterboard application.
Drybase Liquid-Applied DPM is a single-pack barrier coating for above ground use. It is supplied ready to use. It is available in black or white with a consistency similar to that of thick emulsion paint. The product is applied in two coats. Drybase Liquid-Applied DPM Is suitable for use on solid floors, embedded timbers and walls. Once applied, the product cures to form a membrane that is flexible and elastic. Drybase Liquid-Applied DPM is water- based and can be applied to damp substrates by brush, roller, or spray. The applied product is typically touch-dry in one hour.
Size
1 Litre
Interior or Exterior Use
Interior
Coverage per Litre
4.5 m2 per 5 litres for vapour barrier, 7 – 9 m2 per 5 litres for general DPM
12mm 100 x 10,000 rolls of Brickfill closed cell cross linked polyethylene foams for all your requirements for brick and blockwork expansion and movement joints packed in 10 rolls per merchant pack.
Waterproof butyl 75mm overseal tape for sealing over membrane joints, butt joints and overlaps to provide additional protection. Drybase Overseal Tapes are utilised for sealing over joints between Drybase cavity drain membranes and other materials. They can also be applied for sealing around services and challenging details.
Drybase Plaster Mesh Membrane LP is produced using high-quality Polypropylene material and provides a barrier to moisture, salts and vapour. It is a slimline membrane with 2.5mm studs on the rear that enables the management of moisture without significantly reducing room space. A plastic mesh is welded to the front surface of the membrane, allowing it to accept plaster coats via standard trowel application or as a base for dot and dab plasterboard application.
Drybase Liquid-Applied DPM is a single-pack barrier coating for above ground use. It is supplied ready to use. It is available in black or white with a consistency similar to that of thick emulsion paint. The product is applied in two coats. Drybase Liquid-Applied DPM Is suitable for use on solid floors, embedded timbers and walls. Once applied, the product cures to form a membrane that is flexible and elastic. Drybase Liquid-Applied DPM is water- based and can be applied to damp substrates by brush, roller, or spray. The applied product is typically touch-dry in one hour.
12mm 100 x 10,000 rolls of Brickfill closed cell cross linked polyethylene foams for all your requirements for brick and blockwork expansion and movement joints packed in 10 rolls per merchant pack.