Delivery address
Collection branch

Safeguard Dryzone DPC Cream Bba 310ml

293772
Safeguard Dryzone DPC Cream Bba 310ml
Safeguard Dryzone DPC Cream Bba 310ml
Hover Over to Zoom In
Safeguard Dryzone DPC Cream Bba 310ml
Safeguard Dryzone DPC Cream Bba 310ml

Overview

  • Water repellent damp-proofing cream
  • After treatment a 230mm solid brick wall previously affected by rising damp should normally dry out in 6 to 12 months
  • Remains effective against rising damp for at least 20 years
  • High level of active ingredient (>60%)
  • Tested on wide range of substrates
  • WTA-approved for the treatment of rising damp in highly saturated walls (up to 95% saturation)
  • Low hazard and quick to install
  • No electric DPC pump required

Technical specification

Size
310ml
Interior or Exterior Use
Interior or Exterior Use
Coverage per Litre
depends on wall thickness
Time to Full Cure
30 days
VOC Level
Low 0.3-7.1%
Colour
White
Type
DPC Cream
Manufacturer Model No
DM-DRYZ-310
Brand Name
Dryzone

Reviews

Be the first to review this product.
NEW
Retail price

£19.24

each
£16.03 ex. vat
Trade price
£18.28
Inc. VAT
Save with a Trade account
Enter postcode for local availability
Select collection branch for local availability
Please enter your delivery postcode...
Please select your collection branch...

Related products

NEW
Drybase Plaster Mesh Membrane LP is produced using high-quality Polypropylene material and provides a barrier to moisture, salts and vapour. It is a slimline membrane with 2.5mm studs on the rear that enables the management of moisture without significantly reducing room space. A plastic mesh is welded to the front surface of the membrane, allowing it to accept plaster coats via standard trowel application or as a base for dot and dab plasterboard application.
Size
40m
Interior or Exterior Use
Interior
Drying Time
N/A
VOC Level
Minimal 0-0.29%
Colour
Green
Type
Plaster Membrane
Manufacturer Model No
CM-T PLASTER MEMBRANE 2X20
Brand Name
Drybase

£488.51

each (Inc. VAT)
Loading...
Loading...
NEW
Sovereign CDM8 Membrane Lath Plugs are manufactured from polypropylene, giving a corrosion resistant fixing. They are intended for use in damp proofing and waterproofing applications, to secure SovDrain lath membranes to the substrate, as part of the SovDrain waterproofing system.
Size
8mm x 50mm
Length
50mm
Width
8mm
Colour
White
Pack Quantity
250
Certifications Met
None
Type
CDM Lath Plug
Brand Name
Sovereign

£31.50

each (Inc. VAT)
Loading...
Loading...
Visqueen HP Tanking Primer is a black elastomeric bituminous priming solution designed to prepared surfaces prior to the application of Visqueen Self Adhesive Membrane and Torch on Membranes
Manufacturer Model No
RS012071
Brand Name
Visqueen
Colour
Black
Type
Tanking Primer

£92.99

each (Inc. VAT)
Loading...
Loading...
Visqueen Low Permeability Gas Membrane offers a safe solution for the protection of buildings against radon, carbon dioxide and low levels of methane gas when installed in accordance with the relevant codes of practice
Length
12.50 m
Width
4 m
Weight
23 kg
Colour
Yellow
Type
Gas Membrane
Brand Name
Visqueen
Manufacturer Model No
RS014269

£281.77

per roll (Inc. VAT)
Loading...
Loading...
Safeguard Drybase Plaster Membrane 2m X 20m
NEW
Safeguard Drybase Plaster Membrane 2m X 20m
Drybase Plaster Mesh Membrane LP is produced using high-quality Polypropylene material and provides a barrier to moisture, salts and vapour. It is a slimline membrane with 2.5mm studs on the rear that enables the management of moisture without significantly reducing room space. A plastic mesh is welded to the front surface of the membrane, allowing it to accept plaster coats via standard trowel application or as a base for dot and dab plasterboard application.
£488.51 each (Inc. VAT)
Sovereign 30806099 CDM Lath Plug 8mm x 50mm Pack 250
NEW
Sovereign 30806099 CDM Lath Plug 8mm x 50mm Pack 250
Sovereign CDM8 Membrane Lath Plugs are manufactured from polypropylene, giving a corrosion resistant fixing. They are intended for use in damp proofing and waterproofing applications, to secure SovDrain lath membranes to the substrate, as part of the SovDrain waterproofing system.
£31.50 each (Inc. VAT)
Visqueen HP Tanking Primer 5L RS012071
Visqueen HP Tanking Primer 5L RS012071
Visqueen HP Tanking Primer is a black elastomeric bituminous priming solution designed to prepared surfaces prior to the application of Visqueen Self Adhesive Membrane and Torch on Membranes
£92.99 each (Inc. VAT)
Visqueen Yellow Low Permeability Gas Membrane 4m x 12.5m 500mu
Visqueen Yellow Low Permeability Gas Membrane 4m x 12.5m 500mu
Visqueen Low Permeability Gas Membrane offers a safe solution for the protection of buildings against radon, carbon dioxide and low levels of methane gas when installed in accordance with the relevant codes of practice
£281.77 per roll (Inc. VAT)